FMEA Calculation

Provides risk-based FMEA calculations for RPN (Risk Priority Number), RPN Results, and Risk Level.

Legacy Windchill Risk and Reliability Filters

Provides dozens of predefined filters that you can use. Copying this file into a Project overwrites its existing Project Filter file.

FMD91 Modes

Provides failure mode and cause data for various part types based on the FMD91 standard.

FMD97 Modes

Provides failure mode and cause data for various part types based on the FMD-97 standard.

IEC 62380 Modes

Provides failure mode data for various part types based on the IEC TR 62380 standard, Reliability Data Handbook - Universal Model for Reliability Prediction of Electronic Components, PCBs, and Equipment.

MIL-HDBK-338 Rel D Modes

Provides failure mode and cause data for various part types based on the MIL-HDBK-338 (Release D) standard.

NPRD3 Modes

Provides failure mode and cause data for various part types based on the NPRD3 non-electronic standard.

RADC-TR-84-244 Modes

Provides failure mode and cause data for various part types based on the RADC-TR-84-244 standard.

RADC-TR-844-244 4-A Modes

Provides failure mode and cause data for various part types based on the RADC-TR-844-244 4-A standard.

All supplied Graph Template files are copied into the Common Library by default.

FMEA Initial Risk Matrix

Graphs the number of records assigned for every combination of the specified axes in the definition for the initial risk matrix.

FMEA Resulting Risk Matrix

Graphs the number of records assigned for every combination of the specified axes in the definition for the resulting risk matrix.

FMEA Risk Level Distribution

Graphs the number of failure modes in the FMEA Worksheet table for each risk level in a pie chart. The options for risk level calculations are specified on the Risk page under FMEA in the Calculate window.

FMEA Severity Distribution

Graphs the number of failure modes assigned to each severity level in a pie chart.

FMEA Top 10 Failure Mode Causes

Graphs the 10 most frequently occurring failure mode causes in a cylinder bar graph.

FMEA Top 10 Mode Criticalities

Graphs the 10 most critical failure modes in a cylinder bar graph.

FMEA Top 10 RPN

Graphs the 10 highest RPN (Risk Priority Number) values in a cylinder bar graph.

FRACAS Incident Status

Graphs the number of closed versus opened incidents as a pie chart. The Closed? checkbox indicates whether the incident is closed (selected) or opened (cleared).

FRACAS Incidents by Severity

Graphs the number of records assigned to each severity value as an inverted donut graph.

FRACAS Incidents Over Time

Graphs the number of incidents that occurred each month as a line graph with composite markers.

FRACAS Incidents per Part Number

Graphs the number of incidents for each part number as a cylinder bar graph.

Fault Tree Unavailability v Time

Generates a Calculation Results graph where unavailability results for a selected gate are graphed over time for a time-dependent fault tree.

Fault Tree Unreliability v Time

Generates a Calculation Results graph where unreliability results for a selected gate are graphed over time for a time-dependent fault tree.

LCC Cost Breakdown

Graphs the cost percentage calculations by items in the cost breakdown structure for all alternatives in a pie chart.

LCC Cost per Time Interval and Alternative

Graphs the cost calculation results by time interval percentage for all alternatives in a cylinder bar graph.

LCC NPV Cost per Alternative

Graphs the net present value (NPV) calculation results by alternatives in a cylinder bar graph.

LCC Sensitivity Analysis by Alternative

Graphs the cost calculation results by sensitivity for all alternatives in a line graph with composite markers.

Markov Availability v Time

Graphs system availability at the points in time specified in the Calculate window for Markov calculations.

Markov Capacity v Time

Graph system capacity at the points in time specified in the Calculate window for Markov calculations.

Markov Reliability v Time

Graphs system reliability at the points in time specified in the Calculate window for Markov calculations.

Prediction FR v Environment

Graphs the predicted failure rate for each assembly in the System Tree for the GM - Ground Mobile; GF, GU - Ground Fixed, Uncontrolled; and GB, GC - Ground Benign, Controlled environments from the MIL-HDBK-217 and Telcordia models as a cylinder bar graph.

Prediction FR v Stress

Graphs the predicted failure rate for each assembly in the System Tree for a range of stresses from 50 to 150 in increments of 10 as a line graph.

Prediction FR v Temperature

Graphs the predicted failure rate for each assembly in the System Tree for a range of temperatures from 0 to 100 degrees C in increments of 10 as a line graph.

Prediction Mission Reliability

Graphs the Mission Reliability calculation results for the system as a cylinder bar graph. Before this graph can be generated, Mission calculations must be selected on the Prediction page in the Calculate window and prediction calculations must then run.

Prediction MTBF v Environment

Graphs the predicted MTBF for each assembly in the System Tree for the GM - Ground Mobile; GF, GU - Ground Fixed, Uncontrolled; and GB, GC - Ground Benign, Controlled environments from the MIL-HDBK-217 and Telcordia models as a cylinder bar graph.

Prediction MTBF v Stress

Graphs the predicted MTBF for each assembly in the System Tree for a range of stresses from 50 to 150 in increments of 10 as a line graph.

Prediction MTBF v Temperature

Graphs the predicted MTBF for each assembly in the System Tree for a range of temperatures from 0 to 100 degrees C in increments of 10.

Prediction Reliability v Time

Graphs the predicted reliability for each assembly in the System Tree in from time point 0 to time point 100000 in increments of 10000 as a line graph.

Prediction Top 10 Failure Rates

Graphs the ten parts with the highest failure rates as a cylinder bar graph.

RBD Availability v Time

Graphs system availability at the points in time specified in the Calculate window for RBD calculations.

RBD Cumulative Downtime

Graphs total downtime at the points in time specified in the Calculate window for RBD calculations as an area graph.

RBD Failures v Time

Graph the number of failures at the points in time specified in the Calculate window for RBD calculations as a cylinder bar graph.

RBD Reliability v Time

Graphs system reliability at the points in time specified in the Calculate window for RBD calculations as a line graph.

Prediction - All Parts Data (Export, Prediction Parts)

Exports part data for all parts in the System file to a Microsoft Excel file named All Parts Data.xls. The fields exported for each model/category/subcategory combination are described in Prediction Data Exports.

Prediction - Operating Stress (Export, Prediction Parts)

Exports operating stress data for parts in the System file to a Microsoft Excel file named Operating Stresses.xls.

Prediction - Temperature Overrides (Export, Prediction Parts)

Exports temperature override data for parts in the System file to a Microsoft Excel file named Temperature Overrides.xls.

Prediction - Temperature Rise (Export, Prediction Parts)

Exports temperature rise data for parts in the System file to a Microsoft Excel file named Temperature Rise.xls.

HAZOP Deviations

Text phrases that are used to perform a HAZOP study. These phrases make use of primary and secondary keyword combinations frequently used for identifying potential hazards and operability problems.

Legacy Windchill Risk and Reliability Lists

Provides dozens of lists that you can attach to text or memo fields. Copying this file into a Project adds its to the existing List Library files in your Project.

MIL-HDBK-472 Tasks

Repair time data and other associated maintainability data based on the MIL-HDBK-472 standard.

Prediction Cycling Profile

Prediction Cycling Profile

Phase definitions for the RDF 2000 and IEC 62380 calculation models. Definitions include the operating phases and temperatures that the system experiences in a year-long period.

AS-4613 Class A

Derating criteria based on the AS-4613 Class A standard.

AS-4613 Class B

Derating criteria based on the AS-4613 Class B standard.

AS-4613 Class C

Derating criteria based on the AS-4613 Class C standard.

MIL-HDBK-1547

Derating criteria based on the MIL-HDBK-1547 standard.

MIL-STD-975M

Derating criteria based on the MIL-STD-975M standard.

TE000-AB-GTP-010 Rev 1

Derating criteria based on the TE000-AB-GTP-010 Rev1 standard.

FIDES 2004 Mission Profiles

Mission profiles supplied as examples in the FIDES 2004 standard.

Part Quality Grade 0

Process grade data assuming commercial parts and practices used in the design and no documented part selection and part management process exists.

Part Quality Grade 1

Process grade data assuming: 1) Parts and practices used in the design with a documented part selection and part management process plus data is available to assure that COTs assemblies have a good history of reliability. 2) A design compliance checklist exists to ensure that all parts are properly applied, operating at sufficient margins with respect to environmental and operational stresses and take into account lessons learned. 3) Part specifications reflect environmental and regulatory compliance requirements for the specific intended application. 4) Procedures and processes must be in place to identify and handle critical reliability components such as derating, screening, and failure response.

Part Quality Grade 2

Process grade data assuming 1) All elements of grade 1 plus there is a preferred parts list (PPL) with an evaluation and qualification process to add parts to the PPL. 2) Teaming relationships are established with critical component suppliers. 3) Critical parts are burned in for at least 24 hours. 4) Future releases of a part will be compatible with respect to form, fit and function. 5) Likely part developments, evolution and extensions of critical/custom part have been identified by the supplier. 6) Any COTs equipment is certified and marked to sell in Europe (CE marked.)

Part Quality Grade 3

Process grade data assuming 1) All elements of grades1 and 2 plus critical parts are QS9000 certified. 2) Parts control drawings as well as device specifications exist for critical and custom parts. 3) Critical suppliers must supply timely notice of impending part changes to allow the developer to assess the impact. 4) Suppliers in the case of complex part assemblies have supported the developer in performing Failure Modes and Effects Analysis (FMEA) on supplied assemblies. 5) A Design of Experiments (DOE) part evaluation, considering the variations as well as manufacturing variations is conducted.

Report Binder files generate single, comprehensive reports from multiple Report Design files. The descriptions below list the Report Design files inserted in these Report Binder files. Descriptions for the Report Design files themselves appear later in this table.

Accelerated Degradation

Includes two Report Design files: Accelerated Degradation Overview and Accelerated Life Testing Plot.

Accelerated Life Testing

Includes two Report Design files: Accelerated Life Testing Overview and Accelerated Life Testing Plot.

Event Tree (Summary)

Includes three Report Design files: Event Tree Overview, Event Tree Columns-Branches, and Event Tree Diagram.

FTA (Summary)

Includes three Report Design files: FTA Overview, FTA Gates-Events, and FTA Diagram.

FTA ARP4761 (Summary)

Includes two Report Design files: FTA ARP4761 Overview, and FTA ARP4761 Gates-Events.

Maintainability Calculations

Includes two Report Design files: Maintainability Calculations Overview and Maintainability Calculations Details.

Maintainability Standard

Includes two Report Design files: Maintainability Standard Overview and Maintainability Standard Details.

Markov (Summary)

Includes three Report Design files: Markov Overview, Markov States Summary, and Markov Diagram.

Prediction (Summary)

Includes two Report Design files: Prediction Overview and Prediction Parts.

Prediction (Summary) (RDF- IEC)

Includes two Report Design files: Prediction Overview RDF- IEC) and Prediction Parts (RDF- IEC).

RBD (Summary) Landscape

Includes three Report Design files: RBD Overview Landscape, RBD Blocks Landscape, and RBD Diagram Landscape.

RBD (Summary) Portrait

Includes three Report Design files: RBD Overview Portrait, RBD Blocks Portrait, and RBD Diagram Portrait.

Weibull Degradation

Includes three Report Design files: Weibull Degradation Overview, Weibull Degradation Results, and Weibull Plot.

Weibull Life Data

Includes two Report Design files: Weibull Life Data Overview and Weibull Plot.

Weibull Non-Parametric Life Data

Includes three Report Design files: Weibull Non-Parametric Life Data Overview, Weibull Non-Parametric Life Data Results, and Weibull Plot.

Weibull Reliability Growth

Includes two Report Design files: Weibull Reliability Growth Overview and Weibull Plot.

Weibull Warranty

Includes four Report Design files: Weibull Warranty Overview, Weibull Warranty Returns, Weibull Warranty Forecast, and Weibull Plot.

The supplied Report Design files that are most commonly used are copied into the Common Library by default.

Alert reports are available only in the Enterprise Edition.

Alerts

Reports on the alerts in the Project’s Alert file. Included in the report are alert names, time intervals, enabled statuses, and remarks for the alerts inserted for each table type.

Accelerated Degradation Overview

Reports on accelerated degradation data sets in the System file. Included at the top of the report is information about the data set, degradation model, and parameters. The identifiers, times, degradation values, and stress levels for the data points inserted in the ALT Data Points window are then listed.

Accelerated Life Testing Overview

Reports on ALT data sets in the System file. Included at the top of the report is information about the data set, stress type, life stress model, distribution, and parameters. The parameter values for the data points inserted in the ALT Data Points window are then listed along with whether they are failures or suspensions and stress levels.

Accelerated Life Testing Plot

Report on the last generated plot for the ALT data set itself.

Assembly Library - FMEA Worksheet

Reports on FMEA Worksheet data for assemblies in the Assembly Library file. Included in the report are the items/processes, failure modes, local effects, and analysis results.

Assembly Library - Maintainability

Reports on Maintainability data for assemblies in the Assembly Library file. Included in the report are part numbers, repair definitions and levels, and task and FD&I information.

Assembly Library - Prediction Assemblies

Reports on assembly data for assemblies in the Assembly Library file. Included in the report are names, part numbers, reference designators, quantities, descriptions, and calculation models.

Assembly Library - Prediction Parts

Reports on the parts for each assembly in the Assembly Library file. Included in the report are part numbers, part categories, reference designators, descriptions, quantities, and manufacturers.

Assembly Library - System Tree Items

Reports on assembly and child data for assemblies in the Assembly Library file. Included in the report are System Tree identifiers, names, part numbers, and part categories and subcategories.

Audit Trail reports are available only in the Enterprise Edition.

Audit Trail All Actions

Reports on all modifications grouped by table type. Included in the report are modification dates, record identifiers, audit actions, group names, and user name.

Audit Trail All Modifications by Group

Reports on all modifications grouped by the user groups defined in PTC Windchill Risk and Reliability Administrator and by table types. Included in the report are modification dates, record identifiers, changed fields, original data entries, and new data entries.

Audit Trail All Modifications by User

Reports on all modifications made by a specific user, with results grouped by table type. You specify the user name in the Select Filter window when the report is generated. Included in the report are modification dates, record identifiers, changed fields, original data entries, and new data entries.

Audit Trail All Modified Records

Reports on all modifications grouped by table type. Included in the report are modification dates, record identifiers, changed fields, original data entries, and new data entries.

Audit Trail Single Record Modification

Reports on modifications made to a single record in a specific table type. Included in the report are modification dates, user names, changed fields, original data entries, and new data entries.

Calculations (User Defined)

Reports on data in the Project’s Calculation file. Included in the report are calculation names, applicable modules, calculation summaries, and whether calculations run automatically.

Data Definition

Reports on data in a Data Definition file. Included in the report are table types, default prompts, custom user prompts, choice list assignments, and default values.

Event Tree Consequences

Reports on the consequences defined in an Event Tree Consequences file. Included in the report are codes and descriptions.

Event Tree Calculation Results

Reports on the results calculated for an event tree in the System file. Included in the report are branch identifiers, consequences, and calculation results for frequency, unavailability, and unreliability.

Event Tree Columns-Branches

Reports on summary data pertinent to the columns and branches in the event tree. Included in the report are consequences and probabilities.

Event Tree Diagram

Report consists of the event tree diagram itself.

Event Tree Overview

Reports on data related to an event tree in the System file. Included in the report are branch names, descriptions, input types, consequences, and calculation results for frequency and unavailability.

Filters

Reports on data in a Filter file. Included in the report are filter names, applicable modules, and remarks.

FMEA Design

Reports on the data in a Project’s FMEA Design file. Included in the report are the FMEA data fields defined at each data level and indicators as to whether they are key fields or data fields included in FMEA Fault Equivalence files.

FMEA Modes Library

Reports on the data in a FMEA Modes Library file. Included in the report are part classifications, categories, subcategories, failure mode codes, failure modes, and failure mode percentages.

Included at the top of all FMEA report pages is assembly information. Information about the child items of the assembly is then listed in the report table.

FMEA AIAG-4 Design

Reports on data in the format specified for an AIAG-4 automotive design FMEA.

FMEA AIAG-4 Process

Reports on data in the format specified for an AIAG-4 automotive process FMEA.

FMEA AIAG & VDA DFMEA

Reports on data in the format specified for an DFMEA automotive design FMEA.

FMEA AIAG & VDA DFMEA 11X17

Reports on data in the format specified for an DFMEA automotive design FMEA in A3 paper size.

FMEA AIAG & VDA MSR

Reports on data in the format specified for an MSR automotive design FMEA.

FMEA AIAG & VDA MSR 11X17

Reports on data in the format specified for an MSR automotive design FMEA in A3 paper size.

FMEA AIAG & VDA PFMEA

Reports on data in the format specified for an PFMEA automotive process FMEA.

FMEA AIAG & VDA PFMEA 11X17

Reports on data in the format specified for an PFMEA automotive process FMEA in A3 paper size.

FMEA Control Plan

Reports on control plans inserted in the FMEA Control Plans table. This report is available only when the FMEA Control Plans table is turned on in the Table Settings pane in the Project Properties window. For more information, see Table Settings (Project).

FMEA DVP

Reports on DVPs inserted in the FMEA DVPs table. This report is available only when the FMEA DVPs table is turned on in the Table Settings pane in the Project Properties window. For more information, see Table Settings (Project).

FMEA MIL-STD-1629 Task 101

Reports on data in the format specified for MIL-STD-1629 Task 101, which classifies each potential failure according to severity.

FMEA MIL-STD-1629 Task 102

Reports on data in the format specified for MIL-STD-1629 Task 102, which classifies each potential failure according to severity and probability of occurrence so criticality can be assessed.

FMEA Standard Design

Reports on data in the format accepted for a design FMEA. For each failure mode, it shows Severity, Occurrence, Detection, and RPN values before and after recommended corrective actions are taken. An RPN Improvement Percentage value is also included.

FMEA Standard Process

Reports on data in the format accepted for a process FMEA. For each failure mode, it shows Severity, Occurrence, Detection, and RPN values before and after recommended corrective actions are taken.

FRACAS Failure Modes Summary

Reports on the failure modes for all parts. This report includes the number of occurrences and failure mode percentages.

FRACAS Incident Report

Reports on incident data associated with a specific incident. You enter the incident identifier when you generate the report. The report includes incident reporting, analysis, corrective action, and disposition information.

FRACAS Incidents by Part Number

Reports on all incidents for the system by part number. For each part number, this summary report includes incident identifiers, descriptions, and incident occurrence and entry dates. It also indicates who entered the incidents and analyzed the incidents, supplies descriptions of the corrective actions taken, and notes which incidents are closed.

FRACAS Incidents by Problem

Reports on all incidents associated with a specific problem. You enter the problem identifier when you generate the report. The report includes incident identifiers for the incidents associated with the problem, the system tree items with which they are associated, occurrence and close out dates, and status information.

FTA CCF Groups

Reports on the CCF (common cause failure) groups defined in an FTA CCF Groups file. Included in the report are names, model types, and variable and input values for those models.

FTA Event Library

Reports on the various events defined in an FTA Event Library file. Included in the report are event names, models, input values, units, and remarks.

FTA ARP4761 Cut Sets

Reports on cut set results calculated for one or more SAE fault trees. Included in the report for each fault tree are event names, cut set order, and probability calculation results.

FTA ARP4761 Gates-Events

Reports on gate and event property data for one or more SAE fault trees. Included in the report are gate and event names, descriptions, types, target probabilities, models, and their input values.

FTA ARP4761 Importance Measures

Reports on the Birnbaum, Criticality, Fussell-Vesely, and Fussell-Vesely Alternative importance measures for the events in the SAE fault tree when they are calculated. Included in the report are event names and calculated importance measures.

FTA Calculation Results

Reports on the results calculated for one or more fault trees. Included in the report for each fault tree are event names, times, and the calculation results for unreliability, unavailability, number of failures, and frequency.

FTA Cut Sets

Reports on cut set results calculated for one or more fault trees. Included in the report for each fault tree are event names, cut set order, and calculation results for unavailability and unreliability.

FTA Diagram

Report consists of the diagram for one or more fault trees.

FTA Gates-Events

Reports on gate and event property data for one or more fault trees. Included in the report are gate and event names, descriptions, types, models, and their input values.

FTA Importance Measures

Reports on the Birnbaum, Criticality, and Fussell-Vesely importance measures for the events in the fault tree when they are calculated. Included in the report are the top gate names, event names, and calculated importance measures.

FTA Overview

Reports on data related to one or more fault trees (top gates) in the System file. Included in the report are FTA calculation results, and gate and event data.

LCC

Reports on LCC data in the System file. Included in the report are cost breakdown structure (CBS) item names, equations, time intervals, and calculated costs and net present values (NPVs).

LCC Percent

Reports on percentages of total cost of CBS items. Included in the report are item names, equations, time intervals, costs, and percentages of costs.

LCC Sensitivity

Reports on cost sensitivity of CBS items when sensitivity analysis performed. Included in the report are item names, sensitivity percentages, costs, and net present values.

LCC with Variables

Reports on variable values of CBS items. Included in the report are item names, equations, time intervals, costs, and variable values.

LCC Alternatives

Reports on the data associated with the design alternatives defined in an LCC Variables file. Included in the report are alternative variable codes and descriptions.

LCC Time Intervals

Reports on data associated with the time intervals defined in an LCC Variables file. Included in the report are time interval names, descriptions, and interest rates.

LCC Variables

Reports on data associated with the variables defined in an LCC Variables file. Included in the report are variable codes, descriptions, input types, alternative names, time interval names, and values.

List Library

Reports on the lists defined in a List Library file. For each list, the report includes the list name, code, and remarks. Also included for each list item are display text, code, value, and remarks.

Maintainability FDI

Reports on the FD&I (fault detection and isolation) outputs defined in a Maintainability FDI Outputs file. Included in the report are FD&I codes, task quantities, names, frequencies, and descriptions.

Maintainability Groups

Reports on the maintainability groups defined in a Maintainability Groups file. Maintainability groups need only be entered in this file if MIL-HDBK-472 Procedure 5A is used for maintainability predictions. Included in the report are group names and indications about failed item replacements.

Maintainability Calculations Details

Reports on maintainability calculation results for each assembly’s parts. Included in the report are part numbers, reference designators, quantities, failure rate, as well as repair levels, tasks, and repair times.

Maintainability Calculations Overview

Reports on maintainability calculation results for assemblies. Included in the report are assembly names and calculated results for MTTR, MMF/Operating Hour, MMH/Flight Hour, MMH/Repair, Mean Active Maintenance Time, and Mean Corrective Maintenance Time.

Maintainability MMax Summary

Reports on maximum corrective maintenance times for percentiles from 60 to 100. Mmax sigma values are calculated per the equation in MIL-HDBK-472.

Maintainability Standard Details

Reports on maintainability data for parts grouped by assemblies. Included in the report for each assembly are its child part numbers, reference designators, quantities, failure rates, as well as repair levels, repair tasks/FD&I outputs, and repair times.

Maintainability Standard Overview

Reports on basic maintainability information about the system and its assemblies. Included in the report are names, part numbers, reference designators, quantities, and calculated results for failure rate, MMH/OH, and MTTR.

Maintainability Group Tasks

Reports on task groups defined in a Maintainability Task Library file. Included in the report are task group names, repair types, preventive frequency values, descriptions, task listings, and task quantities.

Maintainability Tasks

Reports on tasks defined in a Maintainability Task Library file. Included in the report are task names, technician quantities, repair types, repair times, MTTR elements, and task descriptions.

Markov Calculation Results

Reports on calculation results for a Markov diagram. Results for the steady state include MTBF, MTTF, MTTTR, reliability, availability, unreliability, unavailability, and failure frequency. Result for display times include reliability, availability, unreliability, unavailability, and failure frequency.

Markov Diagram

Report consists of the Markov diagram itself.

Markov Overview

Reports on Markov data entered in the System file. Diagram information includes names, calculated MTBF, MTTF, and MTTR values, and descriptions. Connector information includes names, initial conditions, costs, capacities, and states are included. State information includes names, initial conditions, costs, rates, and descriptions.

Markov States Summary

Reports on the states in a Markov diagram. Included in the report are state names, initial conditions, states, connector names, connector rates, and descriptions.

Prediction Mission Profile

Reports on mission phases defined in a Mission Profile file used with the Prediction module. Included in the report are phase codes, mission phases, percentages of mission time, active environments, temperatures, dormant indicators, and dormant environments.

Prediction Bayesian

Reports on the experience data defined in a Prediction Bayesian file. Included in the report are experience names, types, numbers of field fields, conversion indicators, cumulative hours, and test temperatures.

Prediction Correlation Library Reports

Prediction Correlation

Reports on the correlation data defined in a Prediction Correlation Library file. Included in the report are in-house part numbers, library part numbers, and remarks.

Prediction RDF 2000 Cycling Profile

Reports on the cycling profile data defined in a Prediction Cycling Profiles file. This information is used only by the IEC TR 62389 and RDF 2000 models. Included in the report are profile names, cycling phase names, air temperatures, system temperatures, cycles per year, percentages of time powered on, phase types, temperature rises, and remarks.

Prediction Defaults

Reports on defaults for specific part data for part types defined in a Prediction Defaults file. Included in the report are part categories, subcategories, and defaults for the specific part data.

Prediction Derating

Reports on the derating data for part types defined in a Prediction Derating file. Included in the report are part categories, subcategories, types, calculation models, parameters, minimal ratings with nominal and worst case values, and maximum ratings with nominal and worst case values.

Prediction FIDES Application Factor

Reports on the application factor data in a Prediction FIDES Application Factor file. Included in the report for each phase are question numbers, criteria, descriptions, levels, comments, weights, answers, and raw and weighted points.

Prediction FIDES Lead Free Factor

Reports on the lead free factor data in a Prediction FIDES Lead Free Factor file. Included in the report are question numbers, category, criteria, weights, answers, and weighted points.

Prediction FIDES Mission Profile

Reports on mission phases defined in a Prediction FIDES Mission Profile file. Included in the report are phase codes, calendar hours, on/off indicators, humidity percentages, temperature variations, cycles per year, cycle durations, temperatures, and all of the other various parameters taken into consideration by the FIDES 2004 model.

Prediction FIDES Process Grade

Reports on the process grade data defined for the sections in a Prediction FIDES Process Grade file, including reference numbers, questions, recommendations, weights, answers, and raw and weighted points.

Prediction FIDES Ruggedized Factor

Reports on the ruggedized factor data in a Prediction FIDES Ruggedized Factor file. Included in the report are question numbers, recommendations, weights, answers, and raw and weighted points.

Prediction Parts Library

Report on the data for parts included in a Parts Library file. Included in the report are part numbers, categories, subcategories, and the defaults for specific part data.

Prediction Process Grades

Reports on the process grade data defined for the grade types in the Prediction Process Grade file, including questions, responses, weights, and scores.

Prediction First Year Dropout

Reports on the first year drop-out failure rate if calculated by the Telcordia model. Included in the report for each of the first twelve months are the failure rates, expected number of failures, and average cumulative failure rates.

Prediction Mission Results

Reports on mission reliability calculation results if calculated for mission phases. Included in the report are phase names, system tree items, and calculated results for phase failure rate, MTBF, and reliability.

Prediction Operating Stress

Reports on stress data for all parts in each assembly. Included at the top of the report is information about the assembly. All parts in that assembly are then listed along with their part numbers; current, voltage, and power ratios; and temperature rises, actual temperatures, and failure rates.

Prediction Operating Stress (RDF- IEC)

Reports on stress data for all parts in each assembly for the RDF 2000 or IEC TR 62380 model.

Prediction Overstressed Parts

Reports on all overstressed parts in a prediction according to derating specifications. Parts with an entered or calculated voltage ratio over 100 are considered to be overstressed.

Prediction Overview

Reports on all assemblies in the System file. Included in the report are assembly names, part numbers, reference designators, quantities, and calculation results for failure rate and MTBF.

Prediction Overview (RDF- IEC)

Reports on all assemblies in the System file for the RDF 2000 or IEC TR 62380 model. Included in the report are assembly names, part numbers, reference designators, quantities, and calculation results for failure rate and MTBF.

Prediction Part Type Summary

Reports on the percentages of part quantity and total system failure rate for a part. Included in the report are part types, quantities, percents of total part quantity, failure rates, and percent of total system failure rate.

Prediction Parts

Reports on all parts for each assembly in the System file. Included at the top of the report is information about the assembly. All parts in that assembly are then listed along with their part numbers, categories, reference designators, failure rate units, quantities, and predicted failure rates. You can apply a filter to this report so that it includes only parts with a calculated failure rate of 0. Typically, parts have a failure rate of 0 if they are not supported by the selected calculation model. In such cases, the Prediction Data window provides for entering a specified failure rate.

Prediction Parts (RDF- IEC)

Reports on all parts for each assembly in the System file for the RDF 2000 or IEC TR 62380 model.

Prediction Pi Factors

Reports on the Pi factors for the parts in each assembly in the System file. Included at the top of the report is information about the assembly. All parts in that assembly are then listed along with their part numbers, reference designators, Pi factors, and failure rates.

Prediction Pi Factors (RDF- IEC)

Reports on the Pi factors for the parts in each assembly in the System file for the RDF 2000 or IEC TR 62380 model. The assembly information in this report includes the cycling phase. The Pi factors and failure rates outputted are for that cycling phase.

Prediction Specific Part Data

Reports on the specific part data for the parts in each assembly in the System file. Included at the top of the report is information about the assembly. All parts in that assembly are then listed along with their part numbers, reference designators, specific part parameter data, and failure rates. The parameter data is the data that you enter in the Prediction Data window to calculate the failure rate for the part.

Prediction Specific Part Data (RDF- IEC)

Reports on the specific part data for the parts in each assembly in the System file for the RDF 2000 or IEC TR 62380 model. The assembly information in this report includes the cycling phase. The Pi factors and failure rates outputted are for that cycling phase.

System Tree Overview

Reports on the system tree items in the System file. Included at the top of the report is information about the system. All assemblies and parts in the system are then listed along with their names, part numbers, reference designators, quantities, failure rates, and MTBF values.

System Tree Overview (RDF- IEC)

Reports on the system tree items in the System file for the RDF 2000 or IEC TR 62380 model.

Prediction Values

Reports on the user-defined quality levels and environments defined in a Prediction Values Library file. Included in the report are value names, types, temperatures, applicable calculation models, part categories, subcategories, and values.

RBD Block Library

Reports on the data for blocks in the RBD Block Library file. Included in the report are library identifiers, component identifiers, redundancy types, quantities, repairable or replaceable statuses, repair resources, and spares pools.

RBD Diagram Library

Reports on the data for diagrams in the RBD Diagram Library file. Included in the report are diagram identifiers, diagram descriptions, block identifiers, component identifiers, and block descriptions.

RBD Maintenance Library

Reports on the data for periodic maintenance tasks in the RBD Maintenance Library file. Included in the report are library identifiers and task descriptions.

RBD Repair Resources

Reports on the repair resources in the Project’s RBD Repair Resource file. Included in the report are resource names, team indicators, quantities, pay rates, call-up costs, and descriptions.

RBD Repair Resources - Teams

Reports on repair teams in the Project’s RBD Repair Resource file. Included in the report are team names, assigned resources, quantities, and alternate resources.

RBD Blocks Landscape

Reports on data for the blocks in an RBD diagram in the landscape orientation. Included in the report are part numbers, descriptions, and failure distributions and parameters.

RBD Blocks Portrait

Reports on data for the blocks in an RBD diagram in the portrait orientation. Included in the report are part numbers, descriptions, and failure distributions and parameters.

RBD Calculation Results Landscape

Reports on calculation results for an RBD diagram in the landscape orientation. Results for the steady state are shown at the top of the page. Results at the specified display time are for reliability, unreliability, availability, unavailability, failure rate, number of failures, and total downtime.

RBD Calculation Results Portrait

Reports on calculation results for an RBD diagram in the portrait orientation. Results for the steady state are shown at the top of the page. Results at the specified display time are for reliability, unreliability, availability, unavailability, failure rate, number of failures, and total downtime.

RBD Diagram Landscape

Report consists of the RBD diagrams selected for inclusion in the landscape orientation.

RBD Diagram Portrait

Report consists of the RBD diagrams selected for inclusion in the portrait orientation.

RBD Overview Landscape

Reports on data related to an RBD analysis in the landscape orientation. Included in the report are results calculated at the specified display time for reliability, unreliability, availability, unavailability, failure rate, number of failures, and total downtime.

RBD Overview Portrait

Reports on data related to an RBD analysis in the portrait orientation. Included in the report are part numbers, descriptions, and results calculated at the specified display time for reliability, unreliability, availability, unavailability, failure rate, number of failures, and total downtime.

RBD Spares

Reports on the spares pools in the Project’s RBD Spares file. Included in the report are spares pool names, descriptions, costs, storage costs, transport times, and replenishment and emergency order statuses.

RBD Spares - Maintenance Tasks

Reports on periodic maintenance tasks for spares in the Project’s RBD Spares file. Included in the report are names and descriptions for the spares pools in the RBD Spares file, identifiers and descriptions for tasks in RBD Maintenance Library files, and enabled statuses.

Table Format File

Reports on the fields defined in the Table Format file. Included at the top of the report are the table type and file name. Record numbers, data fields, widths, and disabled statuses are then listed.

Weibull Degradation Overview

Reports on degradation data sets in the System file. Included at the top of the report is information about the data set, degradation model, and parameters. The times and degradation values for the data points inserted in the Weibull Data Points window are then listed.

Weibull Degradation Results

Reports on the results for degradation data sets in the System file. Included at the top of the report is information about the data set, model, and parameters. Parameter values and failure times for the data points inserted in the Weibull Data Points window are then listed along with whether they are failures or suspensions.

Weibull Life Data Overview

Reports on parametric life data sets in the System file. Included at the top of the report is information about the data set, estimation method, confidence type, distribution, and parameters. The parameter values for the data points inserted in the Weibull Data Points window are then listed along with whether they are failures or suspensions.

Weibull Non-Parametric Life Data Overview

Reports on non-parametric life data sets. Included at the top of the report is the System file name, data set name and type, method, and confidence type. Data fields from the Weibull Data Points table and failure/suspension statuses are then listed.

Weibull Non-Parametric Life Data Results

Reports on non-parametric life data sets in the System file. Included at the top of the report is information about the data set, median ranking method, and confidence type. The inspection times, quantities, and values for the data points inserted in the Weibull Data Points window are then listed along with whether they are failures or suspensions.

Weibull Plot

Reports on the last generated plot for the data set itself.

Weibull Reliability Growth Overview

Reports on reliability growth data sets in the System file. Included at the top of the report is information about the data set, estimation method, and parameter values. The inspection times and quantities for the data points inserted in the Weibull Data Points window are then listed along with whether they are failures or suspensions.

Weibull Warranty Forecast

Reports on forecast data for warranty data sets in the System file. Included at the top of the report is information about the data set, model, estimation method, confidence type, distribution, and parameter values. The interval dates, interval numbers, quantities, future failure forecasts, and confidence bounds are then listed.

Weibull Warranty Overview

Reports on sales data for warranty data sets in the System file. Included at the top of the report is information about the data set, model, estimation method, confidence type, distribution, and parameter values. The interval dates, interval numbers, quantities, and future sales are then listed.

Weibull Warranty Returns

Reports on returns data for warranty data sets in the System file. Included at the top of the report is information about the data set, model, estimation method, confidence type, distribution, and parameter values. The interval dates, interval numbers, quantities, and return usage values are then listed.

Workflow reports are available only in the Enterprise Edition.

Workflow

Reports on data in a Workflow file. Included in the report are the workflow steps, codes, and remarks.

The supplied Table Format files are copied into a newly created Project by default.

Configurations

The default setup for the Configurations table. This Table Format file is copied into any new Project that includes a module that supports this table.

FRACAS Incidents

The default setup for the FRACAS Incidents table. This Table Format file is copied into any new Project that includes the FRACAS module.

FTA

The default setup for the FTA Table. This Table Format file is copied into any new Project that includes the FTA module.

Prediction Parts

The default setup for the Parts Table. This Table Format file is copied into any new Project that includes a module that supports this table.

System Tree

The default setup for the System Tree Items table. This Table Format file is copied into any new Project that includes a module that supports this table.