Removing a ‘Repeat of’ Designation
You can remove a
Repeat of designation from a block using either commands on the shortcut menu or the
Links page in the block’s
Calculation Properties window. For more information, see
Links Page.
When you use one of these two methods, which are described below, the Repeat of designation is removed from the block’s text box to indicate that it no longer represents the same physical unit as another block in the diagram.
Method 1
To remove the Repeat of designation using the shortcut menu, do the following:
◦ Right-click the block and select > .
Method 2
To remove the Repeat of designation using the Links page in the block’s Calculation Properties window, do the following:
1. In the diagram, double-click the block to open its Calculation Properties window.
2. On the Links page, under Repeated blocks, click Remove.
The status under this heading changes from This block is a repeat of X, where X is the identifier of the block which it repeats, to This block is not repeated.
3. Click OK.