Additional Capabilities > Manufacturing Process Management > Transforming an eBOM into an mBOM > Using the BOM Transformer > BOM Transformer Task Tabs
BOM Transformer Task Tabs
The task tabs located at the bottom of the upstream and downstream structure panes display information pertinent to the part object selected in the tree structure located directly above.
The following table provides a general description for each tab that may appear in the pane.
Tab
Description
Attributes
Use to view and modify attributes of the object selected in the structure tree. For more information, see Attributes Tab.
Uses
Use to edit the child part usage information of the assembly selected in the structure tree. For more information, see Uses Tab.
Made From
Use to view and manage the associations between Made From parts and finished parts. You can also manage co-produce objects associated with the selected parts. For more information, see Made From.
Visualization
Use to generate and view a 3D representation of the objects in the structure tree.
Equivalent Parts
Use to display and modify the equivalent part information of the object selected in the structure tree.
Equivalent Occurrences
Use to display and modify the equivalent occurrence information of the object selected in the structure tree.
Documentation
Use to view, add, change, or remove resource document associations (alternates and substitutes) from the object selected in the structure tree. For more information, see Documents Tab.
Process Plan
Use to view the process plan associated to the selected object in the structure tree.
Plants
Use to manage the association of a plant with the object selected in the structure tree.
* 
The plants are listed based on the plant filter applied to the part structure.
Departments
Use to manage the association of a department data object with the plant data object selected in the structure tree.
* 
The department data objects displayed are based on the plant filter applied on the part structure using the Edit Filter dialog box.
Alternate BOM
Displays a list of alternate BOMs for the object selected in the structure tree.
Alternate Units
Displays a list of alternate units for an object.
Control Characteristics
Use to view and add control characteristics, and to manage the resources allocated to a control characteristic.
* 
Although the structure pane allows multi-selection, the tabs can only show information associated with one object at a time. As a result, the information in the task tabs only represents the last selected object only.
Isto foi útil?