Changing Units of Measure for Cumulated Time and Cost
The Cumulated Time and Cost function of the Process Plan Explorer does not use the Measurement System default units.
To change the units for the time & cost roll-up, the following properties must be modified:
com.ptc.windchill.mpml.CumulatedTimeAndCostActionTimeUnit
com.ptc.windchill.mpml.CumulatedTimeAndCostActionCostUnit
These properties can be located in the following location:
codebase/com/ptc/windchill/mpml/xconf/mpmlin.properties.xconf
The default values are “min” and “$”, respectively.