Import conflict
Conflict Resolution from Event Management
Potential conflicts happen when Windchill objects being imported exist in the Windchill database, and the object properties of the imported and existing objects do not match.
For more information about conflicts and a list of general conflicts that can occur during import, see Conflict Messages for Import.
When importing to a selective system, the usual default resolution is to override any conflict that occurs for an object on the target system with the new or update object from the source system. When importing to a synchronized system, the default resolution is to retry the import. Retrying the import often requires a manual action by the importing user to resolve the conflict. After resolving the issue, the import can be retried using the Event Management utility.
Conflict Resolution using Event Management utility
The first table lists the conflict messages that are specific to importing administrative objects using the business administrative change promotion command-line utility.
Conflict Description: Message displayed on the command prompt or in the Event Management utility.
Explanation: Describes the problem that has occurred.
Available Resolutions: Options that appear if users opt not to accept default resolutions on import.
Conflict Resolution using XML File
The second table lists the valid values for the type of conflict and possible resolutions that you can use in a conflict resolution XML file for import conflicts:
Conflict Description: Message displayed on the Event Management utility.
ConflictType Constant: Specifies the valid value for a ConflictType element in the XML file.
Resolution Constant: Specifies the valid value for a Resolution element in the XML file.
Common Conflicts
Conflict Description
Explanation
Available Resolutions
User does not have read permission on context.
The user running the utility does not have the appropriate permissions to update an object in a particular context.
Manually resolve the issue and retry the import.
Skip the object import — only valid in selective mode.
User does not have create permission for the following object: <object identity>
The user running the utility does not have the appropriate permissions to create an imported object on the target system.
Manually resolve the issue and retry the import.
Skip the object import — only valid in selective mode.
The following attribute does not exist: <attribute identity>
An attribute on an imported object does not exist on the target system.
Overwrite the profile on the target system with the profile from the source system.
Manually resolve the issue and retry the import.
The following organization does not exist: <organization name>
An organization referenced by an object being imported does not exist on the target system.
Manually create the missing organization and then retry the import.
Skip the object import — only valid in selective mode.
Use the existing organization — only valid in selective mode in systems with one organization.
The following context does not exist: <context name>
A context referenced by an object being imported does not exist on the target system.
Manually resolve the issue and retry the import.
Skip the object import — only valid in selective mode.
The type identifier <object type> cannot be found. See the Basic Administration for further information.
An object type referenced by an object does not exist on the target system.
Manually resolve the issue and retry the import.
Skip the object import — only valid in selective mode.
The user <user name> does not exist.
A user does not exist on the target system.
Manually resolve the issue and retry the import.
Skip the object import — only valid in selective mode.
The following context does not exist: <container path>.
A container does not exist on the target system.
Manually resolve the issue and retry the import.
Skip the object import — only valid in selective mode.
User does not have modify permission for the following object: <object name>
The user running the utility does not have the appropriate permissions to create, update, or delete an imported object on the target system.
Manually resolve the issue and retry the import.
Skip the object import — only valid in selective mode.
The object <name> could not be imported because the container <name> was not found.
The referenced application container or organization for an object being imported does not exist on the target system.
Manually resolve the issue and retry the import.
Skip the object import — only valid in selective mode.
Common Conflicts
Conflict Description
ConflictType Constant
Resolution Constant
User does not have read permission on context.
NO_READ_ACCESS_TO_CONTAINER
RETRY_IMPORT
SKIP_OBJECT_IMPORT (selective and development)
User does not have create permission for the following object: <object identity>
NO_CREATE_ACCESS_FOR_OBJECT
RETRY_IMPORT
SKIP_OBJECT_IMPORT (selective and development)
The following attribute does not exist: <attribute identity>
ATTRIBUTE_DOES_NOT_EXIST
RETRY_IMPORT
OVERWRITE
The following organization does not exist: <organization name>
ORGANIZATION_DOES_NOT_EXIST
RETRY_IMPORT
SKIP_OBJECT_IMPORT (selective and development)
USE_DEFAULT_ORGANIZATION (selective and development)
The following context does not exist: <context name>
CONTAINER_DOES_NOT_EXIST
RETRY_IMPORT
SKIP_OBJECT_IMPORT (selective and development)
User does not have modify permission for the following object: <object name>
NO_MODIFY_ACCESS_FOR_OBJECT
RETRY_IMPORT
SKIP_OBJECT_IMPORT (selective and development)
The type identifier <object type> cannot be found. See the Basic Administration for further information.
TYPE_DOES_NOT_EXIST
RETRY_IMPORT
SKIP_OBJECT_IMPORT (selective and development)
The user <user name> does not exist.
USER_DOES_NOT_EXIST
RETRY_IMPORT
SKIP_OBJECT_IMPORT (selective and development)
The following context does not exist: <container path>.
CONTAINER_DOES_NOT_EXIST
RETRY_IMPORT
SKIP_OBJECT_IMPORT (selective and development)
The object <name> could not be imported because the container <name> was not found.
CONTAINER_DOES_NOT_EXIST_CONFLICT
RETRY_IMPORT
SKIP_OBJECT_IMPORT (selective and development)
Profile Conflicts
The following table provides information on conflicts that can occur during importing Profiles with available resolutions:
Conflict Description
Explanation
Available Resolutions
Profile <profile name> has a later modified date and time on the target system than the version being imported.
A profile on the target system was modified later than the same profile that is being imported from the source system.
Overwrite the profile on the target system with the profile from the source system.
Manually resolve the issue and retry the import.
Skip the object import — only valid in selective mode.
A profile with the name <profile name> already exists in the following context: <context name>
A profile with the same name as a profile being imported already exists in the target system.
Overwrite the profile on the target system with the profile from the source system.
Manually resolve the issue and retry the import.
Conflict Description
ConflictType Constant
Resolution Constant
Profile <profile name> has a later modified date and time on the target system than the version being imported.
OBJECT_ON_TARGET_HAS_BEEN_UPDATED
RETRY_IMPORT
SKIP_OBJECT_IMPORT (selective and development)
OVERWRITE
A profile with the name <profile name> already exists in the following context: <context name>
PROFILE_NAME_EXISTS_IN_SAME_CONTEXT
RETRY_IMPORT
OVERWRITE
Policy Access Control Rule Conflicts
The following table provides information on conflicts that can occur during importing Policy Access Control Rule with available resolutions:
Conflict Description
Explanation
Available Resolutions
The user does not have access to domain <domain name> or it does not exist.
A domain referenced by a policy access control rule does not exist on the target system.
Manually resolve the issue and retry the import.
Skip the object import — only valid in selective mode.
<Object identity> cannot be imported because you do not have authorization for participant <participant name> or the participant does not exist.
A user, group, organization, or role referenced by an object being imported does not exist on the target system or the participant running the utility does not have the appropriate permissions to view the participant.
Manually resolve the issue and retry the import.
Skip the object import — only valid in selective mode.
* 
By default, participants are matched based on distinguished name. The Business Administrative Change Promotion > Participant Identification Using Additional Attributes preference is available to match participants based on attributes such as name, context, or email, depending on the participant type.
An access control rule with the following identity already exists: Domain <domain name>, type <object type>, state <life cycle state>, principal <user, group, organization, or role name>, AllExceptPrincipal <true or false>
A policy access control rule with the same identifying information as a policy access control rule being imported already exists in the target system.
Manually resolve the issue and retry the import.
Overwrite the policy access control rule on the target system with the policy access control rule from the source system — only valid in synchronized mode.
Skip the object import — only valid in selective mode.
Conflict Description
ConflictType Constant
Resolution Constant
The user does not have access to domain <domain name> or it does not exist.
DOMAIN_DOES_NOT_EXIST
RETRY_IMPORT
SKIP_OBJECT_IMPORT (selective and development)
<Object identity> cannot be imported because you do not have authorization for participant <participant name> or the participant does not exist.
PRINCIPAL_REF_PARTICIPANT_NOT_FOUND
RETRY_IMPORT
SKIP_OBJECT_IMPORT (selective and development)
An access control rule with the following identity already exists: Domain <domain name>, type <object type>, state <life cycle state>, principal <user, group, organization, or role name>, AllExceptPrincipal <true or false>
ACCESS_CONTROL_RULE_ALREADY_EXISTS
RETRY_IMPORT
SKIP_OBJECT_IMPORT (selective and development)
OVERWRITE (synchronized mode only)
Object Initialization Rule Conflicts
The following table provides information on conflicts that can occur during importing Object Initialization Rule with available resolutions:
Conflict Description
Explanation
Available Resolutions
OIR <object identity> has a later modified date and time on the target system than the object being imported.
An object initialization rule (OIR) on the target system was modified later than the same OIR that is being imported from the source system.
Skip the object import.
Overwrite the OIR on the target system with the OIR from the source system
The OIR <object name> could not be imported because the container <container path> was not found.
The referenced application container or organization for an OIR being imported does not exist on the target system.
Manually resolve the issue and retry the import.
Skip the object import — only valid in selective mode.
When a target system has only one organization, use the Use Default Organization option to map the organization reference from the source system to that organization on the target system — only valid in selective mode.
An OIR with same identity already exists in the following context: <Container path>
An OIR with the same name as an OIR being imported already exists in the target system.
Overwrite the OIR on the target system with the OIR from the source system.
Skip the object import — only valid in selective mode.
An Enabled OIR object for Object type <Type of object> already exists in the following context: <Container path>
An OIR with Enabled status for the object type being imported already exists in the target system.
Disable the OIR and retry the import.
Manually resolve the issue and retry the import.
Skip the object import — only valid in selective mode.
Conflict Description
ConflictType Constant
Resolution Constant
OIR <object identity> has a later modified date and time on the target system than the object being imported.
OBJECT_ON_TARGET_HAS_BEEN_UPDATED
SKIP_OBJECT_IMPORT
OVERWRITE
The OIR <object name> could not be imported because the container <container path> was not found.
CONTAINER_DOES_NOT_EXIST
RETRY_IMPORT
SKIP_OBJECT_IMPORT (selective and development)
USE_DEFAULT_ORGANIZATION (selective and development)
An OIR with same identity already exists in the following context: <Container path>
OIR_WITH_SAME_IDENTITY_EXISTS
RETRY_IMPORT
SKIP_OBJECT_IMPORT (selective and development)
An Enabled OIR object for Object type <Type of object> already exists in the following context: <Container path>
ANOTHER_OIR_WITH_ENABLED_STATUS_EXISTS
DISABLE_AND_IMPORT
RETRY_IMPORT
SKIP_OBJECT_IMPORT (selective and development)
Preference Conflicts
The following table provides information on conflicts that can occur during importing Preference with available resolutions:
Conflict Description
Explanation
Available Resolutions
The parent preference client <client name> for preference client <client name> does not exist.
A parent preference client does not exist on the target system.
Manually resolve the issue and retry the import.
Skip the object import — only valid in selective mode.
The preference client <client name> has a later modified date and time on the target system than the object being imported.
A preference client on the target system has been updated.
Overwrite the object on the target system with the object from the source system.
Skip the object import — only valid in selective mode.
A preference client with identity <client name> already exists in the system.
A preference client with the same name already exists on the target system.
Manually resolve the issue and retry the import.
Overwrite the object on the target system with the object from the source system.
Skip the object import — only valid in selective mode.
The parent preference category <category name> for category <category name> does not exist.
A parent preference category does not exist on the target system.
Manually resolve the issue and retry the import.
Skip the object import — only valid in selective mode.
The parent preference category <category name> has a later modified date and time on the target system than the object being imported.
A preference category on the target system has been updated.
Overwrite the object on the target system with the object from the source system.
Skip the object import — only valid in selective mode.
A preference category with name <category name> already exists in the system.
A preference category with the same name already exists on the target system.
Manually resolve the issue and retry the import.
Overwrite the object on the target system with the object from the source system.
Skip the object import — only valid in selective mode.
The preference definition <definition name> has a later modified date and time on the target system than the object being imported.
A preference definition has been updated on the target system.
Overwrite the object on the target system with the object from the source system.
Skip the object import — only valid in selective mode.
A preference definition with identity <definition name> already exists in the system.
A preference definition with the same name already exists on the target system.
Manually resolve the issue and retry the import.
Overwrite the object on the target system with the object from the source system.
Skip the object import — only valid in selective mode.
The preference instance is locked.
The updates of a preference instance cannot be imported because the preference instance is locked at the organization or site container level in the target system.
Manually resolve the issue and retry the import.
Overwrite the object on the target system with the object from the source system.
Skip the object import — only valid in selective mode.
The following preference definition does not exist in the system: <definition name>.
A preference definition does not exist on the target system.
Manually resolve the issue and retry the import.
Skip the object import — only valid in selective mode.
The preference client <client name> does not exist.
A preference client does not exist on the target system.
Manually resolve the issue and retry the import.
Skip the object import — only valid in selective mode.
A preference instance with definition <definition name> , client <client name> at \'{2}\' was modified on target system.
A preference instance on the target system has been updated.
Overwrite the object on the target system with the object from the source system.
Skip the object import — only valid in selective mode.
A parent preference instance object for a multi valued preference with following identity does not exist in the system \'{0}\'.
A parent preference instance does not exist on the target system.
Manually resolve the issue and retry the import.
Skip the object import — only valid in selective mode.
A multi valued preference instance <value key> has a later modified date and time on the target system than the object being imported.
A multi valued preference instance on the target system has been updated.
Overwrite the object on the target system with the object from the source system.
Skip the object import — only valid in selective mode.
A multi valued preference with following value key already exists in the system <value key>.
A multi valued preference instance with the same identity already exists in the target system.
Manually resolve the issue and retry the import.
Overwrite the object on the target system with the object from the source system.
Skip the object import — only valid in selective mode.
The following preference category does not exist in the system <category name>.
A preference category does not exist on the target system.
Manually resolve the issue and retry the import.
Skip the object import — only valid in selective mode.
The following preference definition does not exist in the system: <definition name>.
A preference definition does not exist on the target system.
Manually resolve the issue and retry the import.
Skip the object import — only valid in selective mode.
A preference category definition link for following definition has a later modified date and time on the target system than the object being imported: <definition name>.
A preference category definition link on the target system has been updated on the target system.
Overwrite the object on the target system with the object from the source system.
Skip the object import — only valid in selective mode.
Conflict Description
ConflictType Constant
Resolution Constant
The parent preference client <client name> for preference client <client name> does not exist.
PARENT_OBJECT_DOES_NOT_EXIST
RETRY_IMPORT
SKIP_OBJECT_IMPORT (selective and development)
The preference client <client name> has a later modified date and time on the target system than the object being imported.
OBJECT_ON_TARGET_HAS_BEEN_UPDATED
OVERWRITE
SKIP_OBJECT_IMPORT (selective and development)
A preference client with identity <client name> already exists in the system.
PREFERENCE_CLIENT_WITH_SAME_NAME_ALREADY_EXISTS
RETRY_IMPORT
OVERWRITE
SKIP_OBJECT_IMPORT (selective and development)
The parent preference category <category name> for category <category name> does not exist.
PARENT_OBJECT_DOES_NOT_EXIST
RETRY_IMPORT
SKIP_OBJECT_IMPORT (selective and development)
The preference category <category name> has a later modified date and time on the target system than the object being imported.
OBJECT_ON_TARGET_HAS_BEEN_UPDATED
OVERWRITE
SKIP_OBJECT_IMPORT (selective and development)
A preference category with name <category name> already exists in the system.
PREFERENCE_CATEGORY_WITH_SAME_NAME_ALREADY_EXISTS
RETRY_IMPORT
OVERWRITE
SKIP_OBJECT_IMPORT (selective and development)
The preference definition <definition name> has a later modified date and time on the target system than the object being imported.
OBJECT_ON_TARGET_HAS_BEEN_UPDATED
OVERWRITE
SKIP_OBJECT_IMPORT (selective and development)
A preference definition with identity <definition name> already exists in the system.
PREFERENCE_DEFINITION_WITH_SAME_NAME_ALREADY_EXISTS
RETRY_IMPORT
OVERWRITE
SKIP_OBJECT_IMPORT (selective and development)
The preference instance is locked.
PREFERENCE_INSTANCE_LOCKED
RETRY_IMPORT
OVERWRITE
SKIP_OBJECT_IMPORT (selective and development)
The following preference definition does not exist in the system: <definition name>.
PREFERENCE_DEFINITION_DOES_NOT_EXIST
RETRY_IMPORT
SKIP_OBJECT_IMPORT (selective and development)
The preference client <client name> does not exist.
PREFERENCE_CLIENT_DOES_NOT_EXIST
RETRY_IMPORT
SKIP_OBJECT_IMPORT (selective and development)
A preference instance with definition <definition name> , client <client name> at \'{2}\' was modified on target system.
PREFERENCE_INSTANCE_VALUE_MODIFIED_ON_TARGET
OVERWRITE
SKIP_OBJECT_IMPORT (selective and development)
A parent preference instance object for Multivalue preference with following identity does not exist in the system \'{0}\'.
PARENT_PREFERENCE_INSTANCE_DOES_NOT_EXIST
RETRY_IMPORT
SKIP_OBJECT_IMPORT (selective and development)
A multi valued preference instance <value key> has a later modified date and time on the target system than the object being imported.
OBJECT_ON_TARGET_HAS_BEEN_UPDATED
OVERWRITE
SKIP_OBJECT_IMPORT (selective and development)
A multivalued preference with following value key already exists in the system <value key>.
MULTIVALUE_PREFERENCE_WITH_SAME_IDENTITY_ALREADY_EXISTS
RETRY_IMPORT
OVERWRITE
SKIP_OBJECT_IMPORT (selective and development)
The following preference category does not exist in the system <category name>.
PREFERENCE_CATEGORY_DOES_NOT_EXIST
RETRY_IMPORT
SKIP_OBJECT_IMPORT (selective and development)
The following preference definition does not exist in the system: <definition name>.
PREFERENCE_DEFINITION_DOES_NOT_EXIST
RETRY_IMPORT
SKIP_OBJECT_IMPORT (selective and development)
A preference category definition link for following definition has a later modified date and time on the target system than the object being imported: <definition name>.
OBJECT_ON_TARGET_HAS_BEEN_UPDATED
OVERWRITE
SKIP_OBJECT_IMPORT (selective and development)
Lifecycle and Workflow Process Template Conflicts
The following table provides information on conflicts that can occur during importing Lifecycle and Workflow Process Template with available resolutions
Conflict Description
Explanation
Available Resolutions
The task name <task type> does not exist for <activity name>.
A task name does not exist for the referenced activity.
Manually resolve the issue and retry the import.
Skip the object import.
The Workflow Process Template with following identity already exists: name <template name>, context <container name>.
A workflow process template with the same identifying information as a workflow process template being imported already exists in the target system.
Iterate the object and retry the import.
Manually resolve the issue and retry the import.
Skip the object import.
The scope for the following Workflow Process Template cannot be narrowed: <template name>.
Change in the scope or hierarchy of a workflow process template is not supported.
Manually resolve the issue and retry the import.
Skip the object import.
A newer iteration of the following Workflow Process Template exists: name <template name>, context <container name>.
A newer iteration of the workflow process template that is being imported from the source system exists in the target system.
Iterate the object and retry the import.
Manually resolve the issue and retry the import.
Skip the object import.
The Team Template <template name> does not exist within the container <container name>.
A Team Template does not exist in the specified container on the target system.
Manually resolve the issue and retry the import.
Skip the object import.
The actor role <role name> does not exist for <node name>.
An actor role for the specified node does not exist on the target system.
Manually resolve the issue and retry the import.
Skip the object import.
The role <role name> does not exist for <node name>.
A role for the specified node does not exist on the target system.
Manually resolve the issue and retry the import.
Skip the object import.
The transition <transition name> does not exist for <node name>.
A transition for the specified node does not exist on the target system.
Manually resolve the issue and retry the import.
Skip the object import.
The class type <Java class name used in customization> does not exist for <node name>.
The specified Java class does not exist on the target system.
Manually resolve the issue and retry the import.
Skip the object import.
The following folder location for workflow template does not exist or user does not have access to it: <folder name>.
The folder specified for a workflow template does not exist on the target system or the user does not have access to the specified folder.
Manually resolve the issue and retry the import.
Skip the object import.
The following transition name does not exist: <transition name>.
The specified transition does not exist on the target system.
Manually resolve the issue and retry the import.
Skip the object import.
The scope for the following Lifecycle Template cannot be narrowed: <lifecycle template name>.
Changing the scope or hierarchy of a lifecycle template is not supported.
Skip the object import.
The following Lifecycle state does not exist: <name of state>.
A lifecycle state does not exist on the target system.
Manually resolve the issue and retry the import.
Skip the object import.
The following series selector for Lifecycle Template does not exist: <series name>.
The referenced series collector does not exist on the target system.
Manually resolve the issue and retry the import.
Skip the object import.
The following actor role for Lifecycle Template does not exist: <actor name>.
An actor role does not exist on the target system.
Manually resolve the issue and retry the import.
Skip the object import.
The following supported class type does not exist: <supported class type>.
The specified Java class does not exist on the target system.
Manually resolve the issue and retry the import.
Skip the object import.
The following role for life cycle template does not exist: <role name>
The specified role does not exist on the target system.
Manually resolve the issue and retry the import.
Skip the object import.
The following Lifecycle Template is checked out: name <template name>, context <container>.
A lifecycle template is checked out on the target system.
Manually resolve the issue and retry the import.
Skip the object import.
A newer iteration of the following Lifecycle Template exists: name <template name>, context <container>.
A newer iteration of the lifecycle template that is being imported from the source system exists in the target system.
Iterate the object and retry the import.
Manually resolve the issue and retry the import.
Skip the object import.
A Lifecycle Template with following identity already exists: name <template name>, context <container>.
A lifecycle template with the same identifying information as a lifecycle template being imported already exists in the target system.
Iterate the object and retry the import.
Manually resolve the issue and retry the import.
Skip the object import.
The required dependent Workflow Template not found: <Workflow Template name>
A dependent workflow template does not exist on the target system.
Manually resolve the issue and retry the import.
Skip the object import.
The following folder location for life cycle template does not exist or user does not have access to it: <folder name>.
The folder specified for a lifecycle template does not exist on the target system or the user does not have access to the specified folder.
Manually resolve the issue and retry the import.
Skip the object import.
Conflict Description
ConflictType Constant
Resolution Constant
The state <name> does not exist for <type name>.
STATE_DOES_NOT_EXISTS
RETRY_IMPORT
SKIP_OBJECT_IMPORT
The task name <task type> does not exist for <activity name>.
TASK_NAME_DOES_NOT_EXISTS
RETRY_IMPORT
SKIP_OBJECT_IMPORT
The Workflow Process Template with following identity already exists: name <template name>, context <container name>.
WORKFLOW_WITH_SAME_IDENTITY_EXISTS
ITERATE
RETRY_IMPORT
SKIP_OBJECT_IMPORT
The scope for the following Workflow Process Template cannot be narrowed: <template name>.
WORKFLOW_CANNOT_NARROW_SCOPE
SKIP_OBJECT_IMPORT
The following Workflow Template is checked out: name <template name>, context <container name>.
WORKFLOW_CHECKED_OUT
RETRY_IMPORT
SKIP_OBJECT_IMPORT
A newer iteration of the following Workflow Process Template exists: name <template name>, context <container name>.
WORKFLOW_NEWER_ITERATION_EXIST
ITERATE
RETRY_IMPORT
SKIP_OBJECT_IMPORT
The Team Template <template name> does not exist within the container <container name>.
TEAM_TEMPLATE_DOES_NOT_EXISTS
RETRY_IMPORT
SKIP_OBJECT_IMPORT
The actor role <role name> does not exist for <node name>.
ACTOR_ROLE_DOES_NOT_EXISTS
RETRY_IMPORT
SKIP_OBJECT_IMPORT
The role <role name> does not exist for <node name>.
ROLE_DOES_NOT_EXISTS
RETRY_IMPORT
SKIP_OBJECT_IMPORT
The transition <transition name> does not exist for <node name>.
TRANSITION_DOES_NOT_EXISTS
RETRY_IMPORT
SKIP_OBJECT_IMPORT
The class type <Java class name used in customization> does not exist for <node name>.
VARIABLE_CLASS_DOES_NOT_EXISTS
RETRY_IMPORT
SKIP_OBJECT_IMPORT
The following folder location for Workflow Template does not exist or user does not have access to it: <folder name>.
WORKFLOW_FOLDER_LOCATION_NOT_FOUND
RETRY_IMPORT
SKIP_OBJECT_IMPORT
The following transition name does not exist: <transition name>.
LCT_TRANSITION_NAME_NOT_FOUND
RETRY_IMPORT
SKIP_OBJECT_IMPORT
The scope for the following Lifecycle Template cannot be narrowed: <lifecycle template name>.
LCT_CANNOT_NARROW_SCOPE
SKIP_OBJECT_IMPORT
The following Lifecycle state does not exist: <name of state>.
LCT_STATE_NOT_FOUND
RETRY_IMPORT
SKIP_OBJECT_IMPORT
The following series selector for Lifecycle Template does not exist: <series name>.
LCT_SERIES_SELECTOR_NOT_FOUND
RETRY_IMPORT
SKIP_OBJECT_IMPORT
The following actor role for Lifecycle Template does not exist: <actor name>.
LCT_ACTOR_ROLE_NOT_FOUND
RETRY_IMPORT
SKIP_OBJECT_IMPORT
The following supported class type does not exist: <supported class type>.
LCT_SUPPORTED_CLASS_NOT_FOUND
RETRY_IMPORT
SKIP_OBJECT_IMPORT
The following role for Lifecycle Template does not exist: <role name>.
LCT_ROLE_NOT_FOUND
RETRY_IMPORT
SKIP_OBJECT_IMPORT
The following Lifecycle Template is checked out: name <template name>, context <container>.
LCT_CHECKED_OUT
RETRY_IMPORT
SKIP_OBJECT_IMPORT
A newer iteration of the following Lifecycle Template exists: name <template name>, context <container>.
LCT_NEWER_ITERATION_EXIST
ITERATE
RETRY_IMPORT
SKIP_OBJECT_IMPORT
A Lifecycle Template with following identity already exists: name <template name>, context <container>.
LCT_WITH_SAME_IDENTITY_EXISTS
ITERATE
RETRY_IMPORT
SKIP_OBJECT_IMPORT
The required dependent Workflow Template not found: <Workflow Template name>.
WORKFLOW_NOT_FOUND
RETRY_IMPORT
SKIP_OBJECT_IMPORT
The following folder location for Lifecycle Template does not exist or user does not have access to it: <folder name>.
LCT_FOLDER_LOCATION_NOT_FOUND
RETRY_IMPORT
SKIP_OBJECT_IMPORT
Type Definition Conflicts
The following table provides information on conflicts that can occur during importing Type Definition with available resolutions:
Conflict Description
Explanation
Available Resolutions
The following type definition has a later modified date and time on target system than the object imported: <Object name>
One or more types has been modified in the target system.
LWCType definition which was exchanged previously through the BAC package has been modified in the target system.
Overwrite the object on the target system with the object from the source system.
Skip the object import.
Parent type definition <Name of the ancestor> for type definition <object name> does not exist.
One or more ancestors of the type does not exist on the target system.
* 
This conflict will not be thrown if the ancestor element is present in the zip file.
Skip the object import.
The ancestor type <Name of the ancestor>of the following type definition has a later modified date and time on the target system than the object being imported: <Object name>
One or more ancestors of the type in the import set has been modified in the target system.
Skip the object import.
A type definition with following identity already exists: <Object name>: display name: Display name of the type definition, internal name: <Internal name of the type definition>, namespace: <Namespace of the type definition>flavor: <Attribute template flavour of the type definition>
One or more types with the same business identity was found on the target system but they have different remote IDs.
Overwrite the object on the target system with the object from the source system.
Skip the object import.
Manually resolve the issue and retry the import.
The following type definition is renamed on target system: <Object name>
One or more types in the import set cannot be found by business identity, but can be found by remote/local ids.
Skip the object import.
Rename the object on target system.
Manually resolve the issue and retry the import.
The following type definition is renamed on source system: <Object name>
One or more types in the import set cannot be found by business identity, but can be found by remote/local ids
Skip the object import.
Rename the object on target system.
Manually resolve the issue and retry the import.
Conflict Description
ConflictType Constant
Resolution Constant
The following type definition has a later modified date and time on target system than the object imported: <Object name>
OBJECT_ON_TARGET_HAS_BEEN_UPDATED
OVERWRITE
SKIP_OBJECT_IMPORT
Parent type definition <Name of the ancestor> for type definition <object name> does not exist.
PARENT_TYPE_DOES_NOT_EXIST
SKIP_OBJECT_IMPORT
The ancestor type <Name of the ancestor>of the following type definition has a later modified date and time on the target system than the object being imported: <Object name>
TYPE_ANCESTOR_ON_TARGET_HAS_BEEN_UPDATED
SKIP_OBJECT_IMPORT.
A type definition with following identity already exists: <Object name>: [display name: Display name of the type definition, internal name: Internal name of the type definition, namespace: Namespace of the type definition, flavor: Attribute template flavour of the type definition].
TYPE_WITH_SAME_IDENTITY_EXISTS
OVERWRITE
SKIP_OBJECT_IMPORT
RETRY_IMPORT
The following type definition is renamed on target system: <Object name>
TYPE_RENAMED_ON_TARGET
SKIP_OBJECT_IMPORT
OVERWRITE
RETRY_IMPORT
The following type definition is renamed on source system: <Object name>
TYPE_RENAMED_ON_SOURCE
SKIP_OBJECT_IMPORT
OVERWRITE
RETRY_IMPORT
Quantities of Measure Conflicts
The following table provides information on conflicts that can occur during importing quantities of measure with available resolutions:
Conflict Description
Explanation
Available Resolutions
User does not have create permission for the following object: <Object name>
The user running the utility does not have the appropriate permissions to create an imported object on the target system
Manually resolve the issue and retry the import.
Skip the object import – valid only in selective and development modes.
User does not have modify permission for the following object: <object name>
The user running the utility does not have the appropriate permissions to update an imported object on the target system
Manually resolve the issue and retry the import.
Skip the object import – valid only in selective and development modes.
A Quantity of Measure with same identity already exists: < Object identity >
A quantity of measure with the same identity already exists in the target system.
Overwrite the object on the target system with the object from the source system.
Skip the object import – valid only in selective and development modes.
<Object Name> has later modified date and time on the target system than the object being imported.
Quantity of measure on the target system has been updated.
Overwrite the object on the target system with the object from the source system.
Skip the object import – valid only in selective and development modes.
Retry- Manually resolve the issue and retry the import
Conflict Description
ConflictType Constant
Resolution Constant
User does not have create permission for the following object:<object identity>
NO_CREATE_ACCESS_FOR_OBJECT
RETRY_IMPORT
SKIP_OBJECT_IMPORT
User does not have modify permission for the following object: <object identity>
NO_MODIFY_ACCESS_FOR_OBJECT
RETRY_IMPORT
SKIP_OBJECT_IMPORT
A Quantity of Measure with same identity already exists: <object identity>
QOM_WITH_SAME_IDENTITY_EXISTS
RETRY_IMPORT
OVERWRITE
SKIP_OBJECT_IMPORT
<object identity> has later modified date and time on the target system than the object being imported.
OBJECT_ON_TARGET_HAS_BEEN_UPDATED
RETRY_IMPORT
OVERWRITE
SKIP_OBJECT_IMPORT
Measurement Systems Conflicts
The following table provides information on conflicts that can occur during importing measurement systems with available resolutions:
Conflict Description
Explanation
Available Resolutions
User does not have create permission for the following object: <object identity>
The user running the utility does not have the appropriate permissions to create an imported object on the target system
Manually resolve the issue and retry the import.
Skip the object import – valid only in selective and development modes.
User does not have modify permission for the following object:<object identity>
The user running the utility does not have the appropriate permissions to update an imported object on the target system
Manually resolve the issue and retry the import.
Skip the object import – valid only in selective and development modes.
A Measurement system with same identity already exists:<Object name>
A measurement system with the same identity already exists in the target system.
Overwrite the object on the target system with the object from the source system.
Skip the object import – valid only in selective and development modes.
Retry- Manually resolve the issue and retry the import
<Object name> has later modified date and time on the target system than the object being imported.
Measurement systems on the target system has been updated.
Overwrite the object on the target system with the object from the source system.
Skip the object import – valid only in selective and development modes.
Retry- Manually resolve the issue and retry the import
Conflict Description
ConflictType Constant
Resolution Constant
User does not have create permission for the following object: <Object name>
NO_CREATE_ACCESS_FOR_OBJECT
RETRY_IMPORT
SKIP_OBJECT_IMPORT
User does not have modify permission for the following object: <object name>
NO_MODIFY_ACCESS_FOR_OBJECT
RETRY_IMPORT
SKIP_OBJECT_IMPORT
A Measurement system with same identity already exists:<Object identity>
MS_WITH_SAME_IDENTITY_EXISTS
RETRY_IMPORT
OVERWRITE
SKIP_OBJECT_IMPORT
<Object name> has later modified date and time on the target system than the object being imported.
OBJECT_ON_TARGET_HAS_BEEN_UPDATED
RETRY_IMPORT
OVERWRITE
SKIP_OBJECT_IMPORT
Global Enumerations Conflicts
The following table provides information on conflicts that can occur when importing global enumeration, modeled enumeration, or custom UI text with available resolutions:
Conflict Description
Explanation
Available Resolutions
User does not have create permission for the following object: <Object identity>
The user running the utility does not have the appropriate permissions to create global enumeration, modeled enumeration, or custom UI text on the target system.
Manually resolve the issue and retry the import.
Skip the object import – valid only in selective and development modes.
User does not have modify permission for the following object: <Object identity>
The user running the utility does not have the appropriate permissions to update an imported object on the target system
Manually resolve the issue and retry the import.
Skip the object import – valid only in selective and development modes.
A Global Enumeration with same identity already exists: <Object identity>
Global enumeration, modeled enumeration, or custom UI text with the same identity already exists in the target system.
Overwrite the object on the target system with the object from the source system.
Skip the object import – valid only in selective and development modes.
Global Enumeration <Object identity> has a different master enumeration on the target system.
Global enumeration, modeled enumeration, or custom UI text has a different master enumeration on the target system.
Skip the object import – valid only in selective and development modes.
* 
For the additional information about the skip resolution for this conflict, see the section after the following table.
Retry- Manually resolve the issue and retry the import.
<Object identity> has later modified date and time on the target system than the object being imported.
Global enumeration, modeled enumeration, or custom UI text on the target system has been updated.
Overwrite the object on the target system with the object from the source system.
Skip the object import – valid only in selective and development modes.
Retry- Manually resolve the issue and retry the import.
An Organizer with same identity already exists:<organizer name>
An organizer with the same identity already exists in the target system.
Overwrite the object on the target system with the object from the source system.
Skip the object import – valid only in selective and development modes.
Retry- Manually resolve the issue and retry the import.
An Organizer <organizer name>has a later modified date and time on the target system than the object being imported
One or more enumeration organizer or text organizer on the target system has been updated.
Overwrite the object on the target system with the object from the source system.
Skip the object import – valid only in selective and development modes.
Retry- Manually resolve the issue and retry the import.
A Global Enumeration with same identity already exists <Object identity> under different Hierarchy
A global enumeration, modeled enumeration, or custom UI text with same identity already exists under different hierarchy
Retry and skip the object import.
An Organizer with same identity already exists: <organizer name> under different Hierarchy
An organizer with same identity already exists on target but under different hierarchy
Retry and skip the object import.
Conflict Description
ConflictType Constant
Resolution Constant
User does not have create permission for the following object: <Object identity>
NO_CREATE_ACCESS_FOR_OBJECT
RETRY_IMPORT
SKIP_OBJECT_IMPORT
User does not have modify permission for the following object: <object name>
NO_MODIFY_ACCESS_FOR_OBJECT
RETRY_IMPORT
SKIP_OBJECT_IMPORT
A Global Enumeration with same identity already exists: <object name>
ENUM_DEF_WITH_SAME_IDENTITY_EXISTS
RETRY_IMPORT
OVERWRITE
SKIP_OBJECT_IMPORT
Global Enumeration <object name> has a different master enumeration on the target system.
ENUM_DEF_ON_TARGET_HAS_MASTER_MISMATCH
RETRY_IMPORT
SKIP_OBJECT_IMPORT
* 
For the additional information about the skip resolution for this conflict, see the section after this table.
An Organizer with same identity already exists: <organizer name>
ORGANIZER_WITH_SAME_IDENTITY_EXISTS
RETRY_IMPORT
OVERWRITE
SKIP_OBJECT_IMPORT
An Organizer <organizer name> has a later modified date and time on the target system than the object being imported
OBJECT_ON_TARGET_HAS_BEEN_UPDATED
RETRY_IMPORT
OVERWRITE
SKIP_OBJECT_IMPORT
<Object identity> has later modified date and time on the target system than the object being imported.
OBJECT_ON_TARGET_HAS_BEEN_UPDATED
RETRY_IMPORT
OVERWRITE
SKIP_OBJECT_IMPORT
When skip resolution is applied on a global enumeration, modeled enumeration, or custom UI text that has a different master enumeration on the target system and the following is true, a complete hierarchy under the immediate organizer is skipped.
The source and target systems are identical.
The enumerations or custom UI text of the target and source systems have the same immediate parent organizer.
For example, enumeration definitions are same in the source and target systems as indicated in the following table:
Source
Target
Organizer1
Organizer1
Organizer2
Enumeration2A
Enumeration2B
Organizer3
Enumeration3A
Organizer2
Enumeration2A
Enumeration2B
Organizer3
Enumeration3A
For source and target systems, there is a parent organizer Organizer1, immediate organizers Organizer2 and Organizer3. The immediate organizer Organizer2 has enumerations Enumeration2A, and Enumeration2B.
The immediate organizer Organizer3 has enumeration Enumeration3A.
You update the Enumeration2A, Enumeration2B, and Enumeration3A in the target system by exporting a package from the source system and importing it to the target system. For such scenario, a conflict occurs and the message “A Global Enumeration with same identity already exists: <Object identity> is returned.
When you select the SKIP_OBJECT_IMPORT resolution for Enumeration2A and the OVERWRITE resolution for Enumeration2B and Enumeration3A, then the resolution process skips Enumeration2A. However, it also skips Enumeration2B though you have selected the OVERWRITE resolution for Enumeration2B because Enumeration2A and Enumeration2B have same the common immediate parent organizer, that is, Organizer2.
The target system imports Enumeration3A successfully because the immediate parent organizer is Organizer3.
Reusable Attributes Conflicts
The following table provides information on conflicts that can occur during importing reusable attributes with available resolutions:
Conflict Description
Explanation
Available Resolutions
User does not have create permission for the following object: <Object identity>
The user running the utility does not have the appropriate permissions to create attribute definition on the target system
Manually resolve the issue and retry the import.
Skip the object import – valid only in selective and development modes.
User does not have modify permission for the following object: <object identity>
The user running the utility does not have the appropriate permissions to update an imported object on the target system
Manually resolve the issue and retry the import.
Skip the object import – valid only in selective and development modes.
An Attribute definition with same identity already exists: <Object name>
An Attribute definition with the same identity already exists in the target system.
Overwrite the object on the target system with the object from the source system.
Skip the object import – valid only in selective and development modes.
An Organizer with same identity already exists: <Organizer name>
An organizer with the same identity already exists in the target system.
Overwrite the object on the target system with the object from the source system.
Skip the object import – valid only in selective and development modes.
Retry- Manually resolve the issue and retry the import
An Organizer <organizer name> has a later modified date and time on the target system than the object being imported
Resuable attribute organizer on the target system has been updated.
Overwrite the object on the target system with the object from the source system.
Skip the object import – valid only in selective and development modes.
Retry- Manually resolve the issue and retry the import
<Object name> has later modified date and time on the target system than the object being imported.
Attribute definition on the target system has been updated.
Overwrite the object on the target system with the object from the source system.
Skip the object import – valid only in selective and development modes.
Retry- Manually resolve the issue and retry the import
Conflict Description
ConflictType Constant
Resolution Constant
User does not have create permission for the following object: <Object identity>
NO_CREATE_ACCESS_FOR_OBJECT
RETRY_IMPORT
SKIP_OBJECT_IMPORT
User does not have modify permission for the following object: <object name>
NO_MODIFY_ACCESS_FOR_OBJECT
RETRY_IMPORT
SKIP_OBJECT_IMPORT
An Attribute definition with same identity already exists: <object identity>
ATTRDEFN_WITH_SAME_IDENTITY_EXISTS
RETRY_IMPORT
OVERWRITE
SKIP_OBJECT_IMPORT
<object identity> has later modified date and time on the target system than the object being imported.
OBJECT_ON_TARGET_HAS_BEEN_UPDATED
RETRY_IMPORT
OVERWRITE
SKIP_OBJECT_IMPORT
An Organizer with same identity already exists: <organizer name>
ORGANIZER_WITH_SAME_IDENTITY_EXISTS
RETRY_IMPORT
OVERWRITE
SKIP_OBJECT_IMPORT
An Organizer <organizer name> has a later modified date and time on the target system than the object being imported
OBJECT_ON_TARGET_HAS_BEEN_UPDATED
RETRY_IMPORT
OVERWRITE
SKIP_OBJECT_IMPORT
The following is a sample conflict resolution XML file for import conflicts:
<BACConflictResolutionPairs>
<BACConflictResolutionPair>
<ConflictType>NO_READ_ACCESS_TO_CONTAINER</ConflictType>
<Resolution>SKIP_OBJECT_IMPORT</Resolution>
</BACConflictResolutionPair>
<BACConflictResolutionPair>
<ConflictType>PROFILE_NAME_EXISTS_IN_SAME_CONTEXT</ConflictType>
<Resolution>RETRY_IMPORT</Resolution>
</BACConflictResolutionPair>
<BACConflictResolutionPair>
<ConflictType>OBJECT_ON_TARGET_HAS_BEEN_UPDATED</ConflictType>
<Resolution>OVERWRITE</Resolution>
</BACConflictResolutionPair>
</BACConflictResolutionPairs>
Shared Table Views Conflicts
The following table provides information on conflicts that can occur during importing Shared Table Views with available resolutions:
Conflict Description
Explanation
Available Resolutions
A Table View with the same name ' <ViewName>' already exists in table id : <InternalTableID>
A shared table view for a given UI already exists on the target system with the same name as the view being imported.
Overwrite the table view on the target system with the one from the source system.
Skip the object import — only valid in selective modes.
Conflict Description
ConflictType Constant
Resolution Constant
Shared table view already exists.
BAC_TABLE_VIEW_EXISTS
SKIP_OBJECT_IMPORT
OVERWRITE
Document Template Conflicts
The following table provides information on conflicts that can occur during importing document template with available resolutions:
Conflict Description
ConflictType Constant
Resolution Constant
A Document Template with same identity already exists
BAC_DOCTEMPLATE_WITH_SAME_IDENTITY_EXISTS
OVERWRITE
RETRY_IMPORT
SKIP_OBJECT_IMPORT
Object has a later modified date and time on the target system than the version being imported.
OBJECT_ON_TARGET_HAS_BEEN_UPDATED
<Generic conflict – add info already available for other Objects>
<Generic conflict – add info already available for other Objects>
NO_CREATE_ACCESS_FOR_OBJECT
<Generic conflict – add info already available for other Objects>
<Generic conflict – add info already available for other Objects>
NO_MODIFY_ACCESS_FOR_OBJECT
<Generic conflict – add info already available for other Objects>
A Document Template with same number <number> already exists: <object identity>
BAC_DOCTEMPLATE_WITH_SAME_NUMBER_EXISTS
Skip
Retry
* 
Most of the Document conflicts are applicable for Document template and additional resolutions for BAC such as RETRY_IMPORT and SKIP_OBJECT_IMPORT as applicable will be available for BAC import for all these conflicts.
Report Template Conflicts
The following table provides information on conflicts that can occur when importing report template with available resolutions:
Conflict Description
ConflictType Constant
Resolution Constant
A Report Template with same identity already exists
BAC_REPTEMPLATE_WITH_SAME_IDENTITY_EXISTS
OVERWRITE
RETRY_IMPORT
SKIP_OBJECT_IMPORT
Object has a later modified date and time on the target system than the version being imported.
OBJECT_ON_TARGET_HAS_BEEN_UPDATED
<Generic conflict – add info already available for other Objects>
<Generic conflict – add info already available for other Objects>
NO_CREATE_ACCESS_FOR_OBJECT
<Generic conflict – add info already available for other Objects>
<Generic conflict – add info already available for other Objects>
NO_MODIFY_ACCESS_FOR_OBJECT
<Generic conflict – add info already available for other Objects>
List-Based Versioning Scheme Conflicts
The following table provides information on conflicts that can occur when importing list-based versioning scheme with available resolutions:
Conflict Description
Explanation
Available Resolutions
List-based versioning scheme cannot be imported because the user does not have the necessary permission.
The list-based versioning scheme can only be imported by Site Administrators who are members of the Business Administrative Change Package Importer user group.
Skip the object import.
Errors found in the List-Based Versioning Scheme XML: <Error List>
The list-based versioning scheme XML is not valid.
Skip the object import.
Isto foi útil?