先決條件
在本主題中,您將會了解 ThingWorx Navigate 的先決條件。這其中包括硬體大小調整、ThingWorx Foundation 與 Windchill 的需求。
您可以直接導覽至下列任何主題:
產品相容性資訊
如需瞭解
Windchill、ThingWorx、Web 瀏覽器、協力廠商軟體及其他必要應用程式的支援版本,請查閱
Release Advisor。
使用 Release Advisor
欲在 Release Advisor 中檢視發行版本一覽表:
2. 在「主要產品」頁中,執行下列步驟:
a. 在「產品系列」欄位中,選取 ThingWorx。
b. 在「產品」欄位中,選取 ThingWorx Navigate。
c. 在「版本」欄位中,選取您需要瞭解其相容性資訊的版本。
d. 按一下「新增」。
3. 按一下「下一步」。
4. 所選產品的發行版本一覽表將提供在頁面頂部「主要產品」列的「發行版本一覽表」欄位中。
如需有關使用 Release Advisor 的其他資訊,請參閱「PTC 知識庫」中的此
技術支援文章。
硬體大小調整
• 在 ThingWorx 說明中心中審核
系統需求的 ThingWorx 調整大小指導原則。
ThingWorx 需求與 ThingWorx Navigate 授權
ThingWorx Foundation 必須在安裝
ThingWorx Navigate 前使用安裝程式進行安裝。如需安裝
ThingWorx Foundation 的說明,請參閱 ThingWorx 9 說明中心的
ThingWorx Foundation 安裝程式。
|
• 如果您打算使用單一登入 (SSO) 驗證配置 ThingWorx Navigate,您必須先使用 SSL 配置 ThingWorx Foundation,然後才能開始 ThingWorx Navigate 安裝。
• 雖然 ThingWorx Foundation 支援 PingFederate、Azure Active Directory 以及 Active Directory Federation Services 作為中央驗證伺服器 (CAS),但 ThingWorx Navigate 在此發行版本中僅支援 PingFederate。
|
使用安裝程式安裝 ThingWorx Foundation 之後,請執行「授權配置器」工具來接收具有 ThingWorx Navigate 權利的有效授權。
解除安裝 ThingWorx Integration Runtime
如果您有現有的 ThingWorx Integration Runtime 安裝,請依照下表中與您的作業系統相關的指示將其解除安裝:
Windows
|
Linux
|
1. 從「任務管理員」中,停止 ThingWorx-IntegrationRuntime 服務。
2. 在指令提示中,執行下列指令:
sc delete Thingworx-IntegrationRuntime
|
1. 在指令提示中,執行下列指令:
systemctl stop Thingworx-IntegrationRuntime systemctl disable Thingworx-IntegrationRuntime rm -f /etc/systemd/system/Thingworx-IntegrationRuntime.service systemctl daemon-reload
|
Windchill 需求
這些是針對 Windchill 的需求:
• Windchill - 請確保您使用的是支援
Windchill 發行版本的最低受支援 CPS 版本。如需瞭解支援的版本與最小 CPS,請查閱
Release Advisor。如需有關使用 Release Advisor 的說明,請參閱本主題中的
產品相容性資訊一節。
• 為了加強安全性,我們建議您先使用 SSL 配置
Windchill 伺服器,然後再開始
ThingWorx Navigate 安裝。如需有關如何執行此操作的指示,請參閱
Windchill 安裝與組態指南。
|
如果您計劃使用 Windchill 驗證來配置 ThingWorx Navigate,您必須使用 SSL 配置 Windchill 伺服器,然後才能開始安裝。
|
• 根據
Windchill 說明中心中
TLS 1.3 Support for Windchill 主題的 "Enabling TLS 1.2" 一節中提供的指示啟用 TLS 1.2。若要使
Windchill 連線依預期運作,則需要此組態,特別是當透過
Windchill 驗證設定
ThingWorx Navigate 時。
• 欲在
Windchill 中啟用上載與下載請求,您需要使用
此文章中的指示,將
Windchill 配置為允許「跨原始來源資源共用」(CORS)。請確保使用相同協定 (HTTP 或 HTTPS) 配置
Windchill 與
ThingWorx。PTC 建議使用安全連線 (HTTPS)。
將 Windchill 配置為允許 CORS 可讓您執行下列操作:
◦ 將附件上載至「報告問題」任務。
配置 Windchill 時,可使用 ThingWorx 的網址更新 web.xml 檔案中的 [ALLOWED_ORIGINS] 參數。例如,https://ThingWorxHost:Port。
◦ 下載附件,例如,在使用「檢視零件結構」任務時,擷取只存在於 Windchill 複本儲存庫中的圖形檔案。
• 電子簽名功能的先決條件:
KeyStore 與 TrustStore 檔案
在配置
ThingWorx Navigate 時,您需要建立 KeyStore 與 TrustStore 檔案。您可以立即建立這些檔案,也可以在開始配置之前建立。如需詳細指示,請參閱
針對 ThingWorx Navigate 建立 KeyStore 與 TrustStore 檔案主題。
所需的檔案取決於您選擇的驗證方法。轉至下列其中一個主題來審核所需的檔案: