Step 6. Configure the Connector

Getting an Azure IoT Hub Connector Up and Running > Step 6. Configure the Connector

This section provides instructions for creating the appropriate configuration file for the Azure IoT Hub Connector for your application:

• Azure IoT Edge devices or OPC UA Servers such as ThingWorx Kepware Server (TKS), to Microsoft Azure Industrial IoT for OPC UA, to ThingWorx Azure IoT Hub Connector to ThingWorx Platform in single-server mode.

Refer to the following topics:

1. Before You Begin Configuration when using any of the applications.

2. —

Choose the configuration topic for your ThingWorx Platform setup (single-server or High Availability cluster):

◦ Minimal Configuration for Connecting to a ThingWorx Platform in Single-Server Mode

◦ High Availability Configuration

The steps for the ThingWorx Microsoft Azure IIoT OPC UA integration all begin with "If you are using the OPC UA integration", or similar. If you are not using the integration, skip those steps.

3. For additional configuration options, refer to the section, Configuration Properties Reference.