Creo Progressive Die Extension (PDX) Reference Guide > Using PDX > Die Sets, Projects and the Plate Wizard > Plate Wizard > To Add, Modify and Delete Plates
  
To Add, Modify and Delete Plates
1. Open or create the project assembly.
2. Click PDX Tools > Define Plates. The Plate Wizard opens.
3. To add a new plate:
a. Click Plates and then select a plate to add.
b. Click Add. The Properties dialog box opens.
c. Select or enter desired properties and click OK.
d. Click a view to position the plate.
4. To create new plates using Copy:
a. Select one or more plates.
b. Click Edit > Copy or press CTRL+C to copy the plate definition.
c. Click Edit > Paste or press CTRL+V to paste the plates.
5. To move plates:
a. Select one or more plates.
b. Click Edit > Move to move the plates with a specific offset.
6. To align plates, select multiple plates and click one of the buttons described below. The last plate selected is the anchor for the alignment operations.
◦ —Left align the selected plates.
◦ —Right align the selected plates.
◦ —Align the tops of the selected plates.
◦ —Align the bottoms of the selected plates.
◦ —Center the selected plates.
7. To delete plates:
a. Select one or more plates.
b. Click Edit > Delete or press DELETE.