Enterprise phase (UPDM - DoDAF aliases)
Creation
To create an Enterprise Phase:
From an Architectural Description or Service Description: right-click the Architectural Description or Service Description, point to New, point to DoDAF, point to Capability, and then click Enterprise Phase.
From a CV-1 Vision: click the Enterprise Phase button, and then click in free space on the diagram.
You can convert an Enterprise Phase to a Whole Life Enterprise: right-click the Enterprise Phase, point to Convert To, and then click Whole Life Enterprise.
Appearance
When shown on a CV-1 Vision, an Enterprise Phase appears as follows:
Relationships
The following relationships are of importance to an Enterprise Phase:
Can own and be used as a type for Structural Part and Temporal Part elements.
Capability Of Performer relationships link an Enterprise Phase to an exhibited Capability.
The following sections provide information about how an Enterprise Phase is used in the model.
Create an Enterprise Phase from
Create from an Enterprise Phase
In addition to the UPDM elements that can be created from all UPDM elements (Representation, Definition, Information, and Metadata):
Shown on these diagrams, tables and matrices
In addition to the AV-2 Integrated Dictionary and StdV-1 Standards Profile, which can show all UPDM elements:
UPDM writeable properties
The following writeable properties are available on the Enterprise Phase tab of an Enterprise Phase element's Property Pages:
URI
Was this helpful?