Standard (UPDM - MODAF aliases)
Creation
To create a Standard:
• From an
Architectural Description or
Service Description: right-click the Architectural Description or Service Description, point to New, point to MODAF, point to Technical, and then click Standard.
• From a
TV-2 Standards Definition: click the Standard button, and then click in free space on the diagram.
Standard button, and then click in free space on the diagram.You can convert a Standard to a
Functional Standard or
Technical Standard: right click the Standard, point to Convert To, and then click the required command.
Appearance
When shown on a
TV-2 Standards Definition, a Standard appears as follows:
Relationships
The following relationships are of importance to a Standard:
• To link a Standard to elements that conform to that Standard: right-click the element, point to Links, and then click Conforms To.
The following sections provide information about how a Standard is used in the model.
Create a Standard from
Create from a Standard
Only the UPDM elements that can be created from all UPDM elements (
Alias,
Definition,
Information and
Metadata).
Shown on these diagrams, tables and matrices
In addition to the
AV-2 Integrated Dictionaryand
TV-1 Standards Profile, which can show all UPDM elements:
UPDM writeable properties
The following writeable properties are available on the Standard tab of a Standard element's Property Pages:
• currentStatus
• informationTechnologyStandardCategory
• shortName
• URI
• version