Tool Motion — Plunge
The element PRO_E_TOOL_MTN is a member of PRO_E_TOOL_MTN_ARR array and is documented in the header file ProMfgElemToolMtnPlunge.h, and is as shown in the following figure:
The following table describes the elements in the element tree for the approach along tool axis feature.
PRO_E_TOOL_MTN_TYPE | PRO_VALUE_TYPE_INT | Mandatory element. Species the tool motion type . The valid value for this element is Tool Motion — Plunge. | ||
PRO_E_TOOL_MTN_FEED_TYPE | PRO_VALUE_TYPE_INT | Optional element. Specifies the type of feed for the tool motion using the enumerated data type ProToolMtnFeedType. The valid value for this element are: • PRO_TM_FEED_FREE—Specifies a free feed type. Free feed specifies the rate at which the tool moves in the transverse motion, that is, the non-cutting motion. • PRO_TM_FEED_CUT—Specifies a cut feed type. Cut feed specifies the rate at which the tool moves into the workpiece. • PRO_TM_FEED_PLUNGE—Specifies a plunge feed type. Plunge feed specifies the rate at which the tool approaches and plunges into the workpiece. | ||
PRO_E_MFG_PARAM_ARR | Array | Mandatory element. Specifies an array of manufacturing parameters. The element tree for the manufacturing parameter is defined in the header file ProMfgElemParam.h. For more information, refer to the section Manufacturing Parameters for more information on the element tree. | ||
PRO_E_TOOL_MTN_OFFSET | Compound | Optional element. This compound element specifies the offset value. | ||
PRO_E_TOOL_MTN_X_OFFSET | PRO_VALUE_TYPE_DOUBLE | Optional element. Specifies the offset along X-axis. This element can range from negative to positive values. The valid range values for this element are from -MAX_DIM_VALUE to MAX_DIM_VALUE. | ||
PRO_E_TOOL_MTN_Y_OFFSET | PRO_VALUE_TYPE_DOUBLE | Optional element. Specifies the offset along Y-axis. This element can range from negative to positive values. The valid range values for this element are from -MAX_DIM_VALUE to MAX_DIM_VALUE. | ||
PRO_E_TOOL_MTN_Z_OFFSET | PRO_VALUE_TYPE_DOUBLE | Optional element. Specifies the offset along Z-axis. This element can range from negative to positive values. The valid range values for this element are from -MAX_DIM_VALUE to MAX_DIM_VALUE | ||
PRO_E_TOOL_MTN_AXIS_REF | PRO_VALUE_TYPE_SELECTION | Optional element. Specifies the axis selection.
|