Creo Topology Optimization > Optimization Setup > Design Objectives > To Create a Heat Transfer Compliance Design Objective
To Create a Heat Transfer Compliance Design Objective
1. Click Home > Design Objective. The Design Objective dialog box opens.
2. In the Name box, type a name for the design objective.
3. To change the color used for the design objective, click , and select a color in the Color Editor dialog box.
4. To define the physical feature to optimize, in the Response type box, select Heat Transfer Compliance (HTC).
5. To select analyses that correspond to the design objective, in the Analysis box, click the arrow, and select the check boxes of the analyses to include in the design objective.
6. In the Goal box, select an option:
Min—Minimizes the heat transfer compliance.
Max—Maximizes the heat transfer compliance.
7. To assign a weight factor to this design objective in relation to other objectives, in the Weight factor box, type a value.
8. Click OK.