Detailed Drawings > Defining the Drawing Layout > Working with Crosshatch Patterns > To Modify Area Crosshatches of a 2D Cross Section
  
To Modify Area Crosshatches of a 2D Cross Section
Use the following procedure to show or erase crosshatches of selected areas associated with an assembly or a part 2D cross section:
1. Open a part or an assembly drawing.
2. Select one or more cross sections.
3. Double-click or right-click and click Properties on the shortcut menu. The MOD XHATCH menu appears on the Menu Manager.
4. Click X-Area and Pick to select one or more areas of a component.
5. Click Erase to erase crosshatches of the selected areas or click Show to display erased crosshatches for the selected areas.
6. Click Done to close the MOD XHATCH menu.
 
* You can also use the Erase and Show commands on the shortcut menu to erase or show crosshatches, respectively, for the selected cross sections.