CoCreate OneSpace Designer - Commands Reference Manual

Creates a small outline package part.

Syntax

    (SDPCB_SOT_MODEL)
        (:PARTNAME)       | part name |
        (:PARTTYP)        | part type |
        (:PINS)           | number |
        (:PIN_1)          | 2D position |
        (:PIN_2)          | 2D position |
        (:PIN_SPAN)       | positive length |
        (:PART_WIDTH)     | positive length |
        (:BODY_WIDTH)     | positive length |
        (:BODY_LENGTH)    | positive length |
        (:BODY_HEIGHT)    | positive length |
        (:LEAD_WIDTH)     | positive length |
        (:LEAD_THICK)     | positive length |
        [(:MOUNT_CLEAR)   | positive length | ]

Options

• :PARTNAME - specifies a partname.
• :PARTTYP - specifies a part type (e.g. "resistor", "capacitor", "dip").
• :PINS - specifies the number of pins.
• :PIN_1 - specifies a 2D position.
• :PIN_2 - specifies a 2D position.
• :PIN_SPAN - specifies the distance between the pins
• :PART_WIDTH - specifies the width of the part including the leads.
• :BODY_WIDTH - specifies the width of the part's body.
• :BODY_LENGTH - specifies the length of the part's body.
• :BODY_HEIGHT - specifies the height of the part's body.
• :LEAD_WIDTH - specifies the width of the leads.
• :LEAD_THICK - specifies the thickness of the leads.
• :MOUNT_CLEAR - specifies the mounting clearance of the part.

See also