CoCreate OneSpace Designer - Commands Reference Manual

MEASURE_BLEND_CHAMFER measures blends and chamfers. If the system is being used interactively, the measured values are displayed in the MEASURE Output Field. By using OK the values can be used without retyping. The values are also written into the system inquiry array (see INQ).

For chamfers, MEASURE_BLEND_CHAMFER returns the chamfer distance, the chamfer distance plus the chamfer angle, or two chamfer distances.

For blends, MEASURE_BLEND_CHAMFER returns a single blend radius or both blend radii (for variable blends).

Syntax

---->(MEASURE_BLEND_CHAMFER)--(:FACE)--|blend or chamfer face|---->

Options

Example

The following parameter sequence measures a chamfer or blend.

MEASURE_BLEND_CHAMFER [select a blend or chamfer face]

See also