CoCreate OneSpace Designer - Commands Reference Manual

AM_GEO_C_CIRCLE_TAN_CENTER creates a construction circle tangent to a line, arc, or circle and with a given center point.

Syntax

                                              +--------------------------<------------------------+
                                              |                                                   |
                                              |                                                   |
---->(AM_GEO_C_CIRCLE_TAN_CENTER)--(:GO :OK)--+(*)---(:OWNER)---|AM_GEO_SET_DOMAIN|---(:GO :OK)---+---->
                                              |                                                   |
                                              |                                                   |
                                              +----|select element|----|center pnt|---------------+

                                  (*) necessary when the default owner is not set

Options

• :GO :OK is necessary for setting the owner of the geometry.
• :OWNER specifies the owner of the geometry using the AM_GEO_SET_DOMAIN subaction.

Specify the element to be tangent to and the center point of the new construction circle.

When to use

See also

AM_GEO_SET_DOMAIN interrupt action, AM_GEO_C_CIRCLE_TAN2_PNT terminate action, AM_GEO_C_CIRCLE_TAN3 terminate action, AM_GEO_C_CIRCLE_TAN_PNT_PNT terminate action