Creo™ Schematics 4.0 Help Center > Interconnect Diagrams > CID To WID Interconnect Diagrams > To Route Conductors
  
To Route Conductors
1. In the Circuit diagram, click the arrow next to and click one of the following commands:
◦ Select Circuit—Select a fiber in the Circuit diagram or type a circuit_id value in the box.
◦ Select Circuit from Report—The Select a Circuit Fiber dialog box opens. Select a line in the report and click OK.
The Wiring diagram displays in the graphics window.
2. Choose one of the following commands:
◦ Route Wire—Opens the Catalog Selector dialog box to select a wire.
◦ Route Cable—Opens the Catalog Selector dialog box to select a cable.
◦ Follow Wire—Prompts to select a wire to follow, a start port, and an end port.
The wiring components and ports that are connected in the CID by the selected circuit_id highlight in the graphics window.
3. Select a wire or a cable and click OK.
4. Select a start port and an end port in the Wiring diagram.
5. Continue routing all fibers for the selected circuit in the Wiring diagram.