Creo™ Schematics 4.0 Help Center > Design Basics > Labels > Aligning Labels > To Edit Leader Line Properties
  
To Edit Leader Line Properties
1. Select the leader line. The label is also selected. Click the leader line again to select the only leader line.
2. Right-click and choose Properties from the shortcut menu. The Line Point Properties dialog box opens.
3. Edit the line properties:
Style—Click . The Line Style Selection dialog box opens. Select the style of the leader line and click OK. To place an arrow at the end of the leader line, select Arrows in the Line Style Selection dialog box and click OK.
Layer—Set the layer with which to associate the leader line.
These values are used with decorative lines only:
Width—Set the line thickness.
Pitch—When you apply two adjacent pattern shapes to the leader line, you must set a distance from the center of one pattern shape to the center of the other pattern shape.
Aspect—Set the width to height ratio of the pattern shape.
Shear—Set the shear angle to apply.
4. Edit the leader line endpoints:
a. Click Point Functions. The Point Functions dialog box opens.
b. Select the style to apply to the endpoints. To use a user-defined style, enter it in the box and click Point function.
c. Click Close.
5. Click Apply.
6. Click Close.