Welding Design > Creating Materials, Processes, Preferences, and Parameters > Welding Parameters > General, Welding Material, and Report Parameters > About General Parameters
  
About General Parameters
The following tables lists the general welding parameters available in Welding. The configuration option pro_unit_length drives the default values.
 
The default parameter values are followed by an asterisk (*).
You must substitute positive user-specific values for any negative default parameter value.
Parameters Available—All Welding Standards
Parameter Name
Value
Definition
BACK_TYPE
NONE*
BACKING
BACK_WELD
Weld back type
BACKING
REMOVABLE_STRIP*
PERMANENT_STRIP
Weld back strip option
DEFAULT_SPOT_DIA
value
0.50”/12.70 mm*
Default diameter for spot welds
FACE_OFFSET
value
0.000*
Face offset for weld
FEEDRATE
value
-1.000*
Feed rate of the welding machine’s head across the part (unit = assembly unit/hour)
FIELD
NO*
YES
Field weld, the physical location where a weld is created
GROOVE_ANGLE
value
45 degrees*
Angle of a groove or butt weld between welded components
INTERMITTENT
NO*
YES
Whether weld is intermittent (contains spaces between weld segments)
LENGTH
value
(Read-only) Computed length of trajectory of the welding material
MACH_TYPE
MANUAL*
ROBOTIC
Machining type of the weld
MAX_ALLOWED_LENGTH
value
1000*
Maximum allowed length of the weld
MAX_ROOT_OPENING
value
100*
Maximum root opening
MIN_ALLOWED_LENGTH
value
0*
Minimum allowed length of the weld
MIN_ROOT_OPENING
value
0*
Minimum root opening
NUM_OF_WELDS
value
4.000*
Number of intermittent weld segments
PITCH_DIST
value
0.000*
Pitch distance between intermittent weld segments
PLUG_SIZE
value
0.000*
Depth of the plug weld
PREP_DEPTH
value
0.25”/6.00 mm*
The preparation depth of a weld
ROOT_OPEN
value
0.25”/6.00 mm*
The size of the root opening between welded components
ROOT_PENETRATION
value
0.25”/6.00 mm*
Root penetration depth
SEG_LENGTH
value
0.000*
Length of each intermittent weld segment
SPECIFICATION_NUMBER
string
1EXXXXX*
Specification number of the weld
SPOT_DIAMETER
value
0.50”/12.70 mm*
Spot weld diameter
SPOT_PITCH
value
0.000*
The pitch distance between spot welds
SPOT_STRENGTH
value
0.000*
Strength of spot weld
TREATMENT
NONE
LOW_HYDROGEN*
PRE_HEATING
POST_HEATING
Treatment of the weld
USER_DEFINED
string
A user-defined parameter can be added to the list of parameters
WELD_LENGTH
value
(Read-only) Computed length of the (physical) weld bead
WELD_LWW_THICKNESS
value
0.000*
Curve thickness for a light weld. This parameter is not copied to the weld feature
WELD_MATERIAL
string
The filler material used to create a weld. Access the parameter from the weld preferences tools. This parameter is not copied to the weld feature
WELD_PROCESS
string
A defined process used to create a weld. This parameter is not copied to the weld feature
WELD_SIZE
value
0.25”/6.00 mm*
Size of a weld
WELD_SPACING
AT_CENTER*
AT_END
Start point for intermittent weld segments
X_SECTION_AREA
value
-1.000*
Cross sectional area of the weld
Parameters Available—ANSI
Parameter Name
Value
Definition
BACK_WELD_FINISH
NONE*
CHIP
HAMMER
GRIND
MACHINE
ROLL
UNSPECIFIED
The weld back finish
BACK_WELD_SHAPE
NONE*
FLAT
CONVEX
CONCAVE
The weld back contour
FINISH
None*
CHIP
HAMMER
GRIND
MACHINE
ROLL
UNSPECIFIED
Finishing process of the weld
LEG1
value
0.25”/6.00 mm*
Value given to the first leg of a fillet weld
LEG2
value
0.25”/6.00 mm*
Value given to the second leg of a fillet weld
SHAPE
NONE*
FLAT
CONVEX
CONCAVE
The weld contour
Parameters Available—ISO
Parameter Name
Value
Definition
BACK_WELD_FINISH
NO*
YES
The weld back finish
FINISH
NO*
YES
Finishing process of the weld
LEG_LENGTH
value
0.25”/6.00 mm*
Value given to the first leg of a fillet weld
SHAPE
NONE*
FLAT
CONVEX
CONCAVE
SMOOTH_BLEND
The weld contour
THROAT_THICKNESS
value
0.000*
Value given to the distance from the weld surface to the trajectory