To Get a Summation of Parameter Values of a Repeat Region
1. Open a drawing with one or more repeat regions.
2. On the
Table tab,click
Repeat Region. Alternatively, right-click and click
Repeat Region on the shortcut menu. The
TBL REGIONS menu appears on the Menu Manager.
3. Click Summation on the TBL REGIONS menu.
4. Select a region in the drawing; and choose TBL SUM > Add.
5. Select a report parameter in the repeat region.
6. Type a parameter name
7. Select a table cell to place the parameter. A new parameter is added to the drawing whose value is the summation of the values of the selected report parameter.
8. When you are prompted to update the value, choose TBL REGIONS > Update Tables. The table is updated and the summation parameter is made visible.
|  When you retrieve a saved table containing a summation parameter into a drawing, the system checks whether the drawing already has a parameter of that name. If it cannot find one, it adds one for you. However, if it does find a parameter by that name, you must enter a name to replace it in the table. It then uses that name for the summation parameter. If you do not enter a name, it retrieves the table, but ignores the parameter. |