To Modify a Profile End Point Pattern
1. Click
Framework >
Point Pattern. The
Point Pattern dialog box opens.
2. Click
![](../advanced_framework/images/afx_dia_modify_20x20.png)
.
3. Click the Pattern to Modify reference collector and select the point pattern to modify.
4. Make changes as required by taking the actions listed below:
◦ Change values for X0, X1, N_X, Y0, Y1, and N_Y
◦ Select or clear the X direction symmetric check box.
◦ Select or clear the Y direction symmetric check box.
◦ In the DM box, change the value for hole diameter.
◦ In the T box, change the value for the attach hole depth.
5. Click one of the options listed below to continue:
◦ OK to complete point pattern modification and close the dialog box.
◦ Repeat to complete point pattern modification without closing the dialog box and continue with modifying another point pattern.
◦ Cancel to cancel point pattern modification and close the dialog box.