Power Inverter with Conjugate Heat Transfer: Exercise 2—Preparing the Mesh
1. In the Flow Analysis Tree select Domains.
2. In the Properties panel, Mesh tab, for Mesh Generation, specify the following values:
◦ Maximum Cell Size—0.02
◦ Minimum Cell Size—0.0007
◦ Cell Size on Surfaces—0.01
The values are retained as default settings. You can change these if required.
3. Click 
Generate Mesh to create the mesh for the fluid domain. If the Info dialog box opens, click Yes to convert all the units.
Generate Mesh to create the mesh for the fluid domain. If the Info dialog box opens, click Yes to convert all the units.4. Click 
in the Graphics toolbar to display the style elements. Select 
No Hidden, 
Hidden Line, or 
Wireframe to display the mesh.
in the Graphics toolbar to display the style elements. Select No Hidden, Hidden Line, or Wireframe to display the mesh.5. Clear 
CAD Bodies.
CAD Bodies.6. Enable 
Flow Analysis Bodies.
Flow Analysis Bodies.7. In the Functions panel click 
Turn on/off view properties and select the following from the list: 
Hide all surfaces, 
Hide all grids, and 
Hide all outlines.
Turn on/off view properties and select the following from the list: Hide all surfaces, Hide all grids, and Hide all outlines.8. Under Domains, select all entities except POWERINVERTER_FLUID and CASING. In the View panel, click 
Show to display the selected domains.
Show to display the selected domains.9. In the Properties panel, View tab, set Grid, and Outline to Yes. The mesh appears as shown in the figure.