Creo ModelCHECK > Using GeomIntegrityCHECK > GeomIntegrityCHECK Configuration Options and Their Settings
GeomIntegrityCHECK Configuration Options and Their Settings
All the GeomIntegrityCHECK checks and their configuration options and default settings are listed in the following table. For details, see the topics for the checks.
In the Default Status column, E stands for error warning. This means that when a check is set to E, GeomIntegrityCHECK reports as an error any lack of compliance with the default setting for that check.
Check Name
Geometric Data Criteria in VDA 4955 standard
Configuration
Default Status
Default Setting
Tiny elements
For Curves:
Tiny curve or segment–G-CU-TI
For surfaces:
Degenerate surface boundary–G-SU-DC
For solids:
Tiny solid–G-SO-TI
For faces (Bounded surfaces):
Tiny Face–G-FA-TI
M1_TINY_ELMNT
E
0.020 mm
Identical elements
For curves/wire geometry:
Embedded curves–G-CU-EM
For surfaces:
Embedded surfaces–G-SU-EM
For Drawings:
Embedded elements–D-GE-EM
M2_IDENTICAL_ELMNT
E
0.020 mm
Position continuity
For Curves:
Large segment Gap (G0 discontinuity)–G-CU-LG
For surfaces:
Large patch Gap (G0 discontinuity)–G-SU-LG
M3A_POSITION_CONT
E
0.020 mm
Tangential continuity
For curves:
Non-Tangent segments (G1 discontinuity)–G-CU-NT
For Surfaces:
Non-tangent patches (G1 discontinuity)–G-SU-NT
M3B_TANG_CONT
E
0.100 mm
Curvature continuity
For Curves:
Non-Smooth segments (G2 discontinuity)–G-CU-NS
For Surfaces:
Non-smooth patches (G2 discontinuity)–G-SU-NS
M3C_CURV_CONT
E
10.000 mm
Polynomial degree
For curves:
High-Degree curve–G-CU-HD
For surfaces:
High degree surface–G-SU-HD
M4_POLYN_DEG
E
11o
Waviness
For curves:
Wavy planar curve–G-CU-WV
For Surfaces:
Wavy surface–G-SU-WV
M5_WAVINESS
E
N/A
Knot distance
For curves:
Indistinct curve Knots–G-CU-IK
For surfaces:
Indistinct surface knots–G-SU-IK
M6_KNOT_DIST
E
0.020 mm
Distance from itself
Self-intersecting surface–G-SU-IS
C7_SELF_DIST
E
0.020 mm
IGES conform text
ISO conformable texts–G-DW-CT
D28_IGES_TEXT
E
N/A
Tiny segment edge
Tiny surface or patch–G-SU-TI
SU8_TINY_SEG_EDGE
E
0.200 mm
Minimal curvature radius
Small surface radius of curvature–G-SU-CR
SU9_TINY_CURV_RAD
E
0.500 mm
Angle between edges
Degenerate surface corner–G-SU-DP
SU10_BOUND_ANGLE
E
2o
Reversal of normals
Folded surfaces–G-SU-FO
SU11_NORM_REVERSAL
E
N/A
Patch distribution
Fragmented surface–G-SU-FG
SU12_PATCH_DIST
E
N/A
Unoccupied patch rows
Unused patches–G-SU-UN
SU13_UNOC_PATCH_ROW
E
N/A
Penetration/distance of boundaries
Intersecting loops–G-FA-IS
F14_BOUND_DIST
E
0.020
Proximity of boundary curve to its surface
Large edge face gap–G-FA-EG
F15_SURF_DIST
E
0.020
Parallel Path/similar Orientation
Inconsistent edge in loop–G-LO-IT
F16_SIM_ORIENT
E
N/A
Number of segments in a boundary curve
Fragmented edge–G-ED-FG
F17_NUM_SEG
E
2
Junction / number of faces per edge
Over-used edge–G-SH-NM
T18_NUM_FACE
E
3
Orientation of similar normals
Inconsistent face in shell–G-SH-IT
T19_NORMAL_ORIENT
E
N/A
Knife edge
Sharp face angle–G-SH-SA
T20_KNIFE_EDGES
E
2.000
Distance to vertex edge
Large vertex gap–G-FA-VG
Vertex to edge gap.
SO21_DIST_VERTEX_EDGE
E
0.020
Distance to vertex face
Large vertex gap–G-FA-VG
Vertex to face gap.
SO22_DIST_VERTEX_FACE
E
0.020
Deletion of history
Missing solid construction history–O-SO-MH
SO23_HIST_DELETE
E
N/A
Auxiliary geometry
Unused solid construction history–O-SO-UH
SO24_EXTRA_GEOM
E
N/A
Cavities
Embedded solids–G-SO-EM
SO25_CAVITIES
E
N/A
Multi-body solids
Multi-volume solid–G-SO-MU
SO26_MULT_BODY
E
N/A
Multi-solid parts
Multi-solid model–G-MO-MU
SO27_MULT_SOLID
E
N/A
Was this helpful?