To Copy and Paste Manikin Posture and Constraints
You can copy the posture and constraints from one manikin, and apply the posture and constraints to other manikins in the same assembly.
1. Select the source manikin from which to copy posture and constraints in either of these ways:
◦ Select the 
Manikin node in the Manikin Tree.
Manikin node in the Manikin Tree.◦ In the graphics window, select the whole manikin.
2. Right-click the source manikin, and select 
Copy Posture and Constraints from the shortcut menu. The posture and constraints are copied to the clipboard.
Copy Posture and Constraints from the shortcut menu. The posture and constraints are copied to the clipboard.3. Select and right-click one or more target Manikin nodes in the Manikin Tree, or one or more target manikins in the graphics window, and select 
Paste Posture and Constraints. The pasting happens in two stages:
Manikin nodes in the Manikin Tree, or one or more target manikins in the graphics window, and select Paste Posture and Constraints. The pasting happens in two stages:◦ First, the posture of the source manikin is applied to the target manikins.
◦ Second, the constraints of the source manikin are applied to the target manikins. The lock or unlock status of the DOFs (degrees of freedom) in the target manikins will be the same as the DOFs in the source manikin.
4. If the newly copied constraints cannot work in the target manikin, the assembly could fail. You can delete the problematic constraint, disable it, or redefine it.
Video
See use cases that show copying posture and constraints in a video.