Assembly Design > Using Assembly > Placing Components > Predefined Sets > To Define a Rigid Body as Ground
To Define a Rigid Body as Ground
1. Open an assembly.
2. Click Assemble. The File Open dialog box opens.
3. Select a component (part or subassembly).
4. Click Open. The Component Placement tab opens.
5. Select Default from the constraint list.
6. Click .
* 
Because of improved ground body functionality, Mechanism Design models created prior to Pro/ENGINEER 2001 can lose ground body associations for certain components. In this case, you must redefine the component placement.
Was this helpful?