Creo 자습서 > Creo Flow Analysis 자습서 > 추가 자습서 > Tutorial 3 - Vortex Shedding > Vortex Shedding: Exercise 6—Analyzing Results
Vortex Shedding: Exercise 6—Analyzing Results
This exercise describes how the results are analyzed during and after the simulation. To hide CAD surfaces (not the fluid domain), switch between CAD Bodies and Flow Analysis Bodies in the Show group. Clear any variable display by selecting No Selection in the Legend drop-down. Click XYPlot Panel to view the XY Plot.
* 
1. To show/hide selected geometric entities, click Show in View Panel.
2. To change the color scheme, click on More in the Legend and select between Blue Red and Blue Purple.
Viewing the Vorticity on a Section
Vorticity Z
1/s
1. In the Post-processing group, click Section View and create a section. Section 01 appears under Derived Surfaces.
2. Select Section 01.
3. In the Properties panel, Model tab, set values for the options as listed below:
TypePlane Z
Position — 0.025
4. In the Properties panel, View tab, for Surface, set values for the options as listed below:
GridNo
OutlineYes
VariablePressure [Pa] : Flow
도움이 되셨나요?