Tutoriels Creo > Tutoriels Creo Flow Analysis > Tutoriels supplémentaires > Tutorial 2 - Turbulent Flow in Diffuser > Turbulent Flow in Diffuser: Exercise 5—Creating a Monitoring Point
Turbulent Flow in Diffuser: Exercise 5—Creating a Monitoring Point
1. In the Post-processing group, click Monitor Points. Under Results > Monitoring Points, Point 01 is added.
2. Create ten monitoring points.
3. In Results, under Monitoring Points, specify the Position of the points in meters as shown in Table below:
Points
Positions
Point 01
3.50000, 0.050400, 0.00000
Point 02
3.574999, 0.055900, 0.00000
Point 03
3.65, 0.0609, 0.00000
Point 04
3.724998, 0.0664, 0.00000
Point 05
3.799999, 0.071400, 0.00000
Point 06
3.875, 0.0764, 0.00000
Point 07
3.949999, 0.081900, 0.00000
Point 08
4.025, 0.0864, 0.00000
Point 09
4.1, 0.091900, 0.00000
Point 10
4.217999, 0.099900, 0.00000
4. In the Functions panel click Turn on/off view properties and select Show all surfaces from the list.
Est-ce que cela a été utile ?