Simulation > Creo Simulate > Reference Links > To Use Previous Analysis Results in a Prestress Analysis
To Use Previous Analysis Results in a Prestress Analysis
This procedure assumes you are in the Prestress Static Analysis Definition or Pre-Stress Modal Analysis Definition dialog box.
1. Click the Previous Analysis tab on the analysis dialog box.
2. If you want to use the results from a previously run static analysis, select the Use static analysis results from previous design study check box.
If you do not select this check box, Creo Simulate will run a static analysis as part of running your prestress analysis.
3. Select the following items to include in your prestress analysis:
◦ Design Study (if applicable)
◦ Static Analysis
◦ Load Set
4. If you want to multiply the stress results from a previous static analysis, enter a Load Scale Factor.
5. If you are creating a prestress static analysis, you have the option to select the Combine Results with Results from Previous Static Analysis check box.