Simulation > Creo Simulate > Reference Links > Use Static Analysis Results From Previous Design Study
Use Static Analysis Results From Previous Design Study
For prestress, buckling, and fatigue analyses, Creo Simulate uses the results of a linear static analysis to calculate the prestress, buckling, or fatigue analysis.
You can include the static analysis in one of these ways:
Use results from a previously run static analysis.
Select the option Use static analysis results from previous design study
The dialog box displays the name of a standard design study, static analysis, and load set. If you have multiple studies, analyses, or load sets, you can select the ones you want to use.
* 
Non-linear static analyses are not valid for prestress, buckling, or fatigue analyses. See Nonlinear Options for more information.
For sensitivity and optimization studies, Creo Simulate always reruns the static analysis at each parameter setting, even if you select Use static analysis results from previous design study.
Have Creo Simulate run the static analysis as part of running the prestress, buckling, or fatigue analysis.
Clear the option Use static analysis results from previous design study.
The dialog box displays the name of a static analysis and load set from that analysis. If you have multiple analyses or load sets, you can select the ones you want to use.