About Load Transfer to Creo Simulate Structure Mode
After you run a dynamic analyses in Mechanism Design you can transfer the reaction forces and moments computed for a rigid body to use as loads in Creo Simulate Structure Mode if you have a Mechanism Dynamics license. To transfer loads to Creo Simulate you must specify an in-session analysis, a rigid body, the loads associated with the rigid body, and the times during the analysis to evaluate the loads. You must also select a part, subassembly, or top-level assembly that contains the rigid body to save the loads. The software saves the loads in a load set that you can apply to the same model in Creo Simulate Structure Mode.
To transfer loads to Creo Simulate, you must:
• Run an analysis in Mechanism Design, or recover a saved analysis. You can use dynamic, force balance, or static analyses.
• Define how you want to export the load set.
• Save the component file in Mechanism Design.
• Import the results as a load set in Creo Simulate Structure Mode.
The following loads are included in the transfer to Creo Simulate Structure Mode:
• Cam, slot, gear, servo motor, and joint reaction forces
• Force motor, spring, and damper loads
• Loadcell lock loads
• Gravitational loads
• Inertial loads
• External forces and torques
When you click > , the Load Export dialog box opens, as long as there is an available result set. Use the Load Export dialog box to specify the result set, analysis time, and component to use to create a Mechanism Design load set.
To use the transferred loads, Click > 
Simulate. to open Creo Simulate Structure Mode. Click > . The load set will be named MechanismLoadSetx, where x is a number.
Simulate. to open Creo Simulate Structure Mode. Click > . The load set will be named MechanismLoadSetx, where x is a number.For information on importing the loads into Creo Simulate Structure Mode, search the Help Center.