To Set a Regeneration Value
1. Select a motion axis from the Mechanism Tree or directly on the model. Right-click and choose from the shortcut menu. The MOTION AXIS dialog box opens.
2. Select an assembly zero reference.
3. Drag your model or enter a value in the Current Position box, then click to set it as the Regen Value.
4. Select the Enable regeneration value check box to use this value as the zero point when the model is regenerated.
5. Set the Minimum Limit and the Maximum Limit motion ranges between -360º and 360º for a rotation axis. For a translation axis, set the Minimum Limit between -180º and 180º, less than or equal to the maximum value, and the Maximum Limit between -180º and 180º, greater than or equal to the minimum value.
6. Click .