To Set Up the Register Table(s)
1. Click > > .
2. The following commands are available:
◦ Create—Create a new register table. Enter the name for the table, then edit it in Pro/TABLE. You have to store this table on disk using the Save command below in order to use it in other models.
◦ Modify—Modify an existing register table. In order to be modifiable, the table has to either be created in the model, or added to it using the Retrieve command below.
◦ Retrieve—Read an existing register table from disk to add it to the current manufacturing model.
◦ Save—Save a register table on disk to use it in another model.
◦ Delete—Delete an existing register table.
◦ Show—Display a register table in the Information Window. Select a register table name. Only tables that exist in the model can be displayed.
More than one register table can be added to the model. You can specify which table is to be used in an NC sequence by supplying the name of the table as the REGISTER_TABLE parameter value.
At the time of defining the NC sequence, the Register command appears in the MFG PARAMS menu. It opens the CR/SEL RGR menu with the following commands:
• Set Up—Opens the REGISTER menu to allow you to create, read, or modify register tables.
• Select—Select an existing register table. This sets the REGISTER_TABLE parameter value. In order to be selectable, the table has to either be created in the model, or added to it using the Retrieve command.