Manufacturing > Manufacturing > Wire EDM > About Wire EDM NC Sequences
About Wire EDM NC Sequences
Wire EDM is the NC sequence performed by Wire Electric Discharge Machines. Creo NC lets you create 2- and 4-Axis Wire EDM NC sequences, depending on the number of axes specified when defining the workcell.
To Create a 2-Axis Wire EDM NC Sequence
To Create Rough, Finish, and Detach Cut Motions
To Specify Thread Point and Approach Point
To Specify Taper Angle for 2-Axis Contouring
To Specify Corner Conditions
To Create No Core Cut Motions
To Use Previous Cut Motions
To Mirror Cut Motions
To Create a 4-Axis Wire EDM NC Sequence in Taper Angle Format
To Create a 4-Axis Wire EDM NC Sequence in Head1/Head2 Format
To Set Up the Register Table(s)
To Set Up the Radius Substitution Table(s)
About Automatic Material Removal