Assembly Design > Instrumented Assemblies > Using Sensors > To Load Sensor Data
To Load Sensor Data
You can load sensor data from a CSV file or from a ThingWorxserver. A notification appears when the download from the ThingWorx server is complete.
Loading Sensor Data from a File
1. In an Instrumented Assembly or a model with sensors, click Model > Load Data > Load File, or from the Tools tab. The Open File dialog box opens.
2. Select a parameter CSV file and click Open File. The file opens in the Sensor Data View dialog box.
Loading Sensor Data from a ThingWorx Server
When you receive a notification that the transfer of data from Creo Product Insight for ThingWorx Extension completed, follow the steps below.
1. To load the data from Creo Product Insight for ThingWorx Extension, use one of the following procedures:
◦ Open the Notification Center dialog box, select the model, and click Load Server Data.
◦ Click the arrow next to Load Data and click Load Server Data.
The Sensor Data View dialog box opens.
2. In an Instrumented Assembly or a model with sensors, click the arrow next to Load Data and click Load Server Data. The Sensor Data View dialog box opens.
3. Select the sensors in the table and click Run, or click the arrow and click Run All to update sensor values.