![]() | Vous devrez peut-être définir les filtres de l'arbre du modèle pour afficher la note. Dans le volet de l'arbre du modèle, cliquez sur Affichage (Display), cochez la case Annotations (Annotations). > , puis, sous |
Texte de la note(pas sensible à la casse) | Affichage de la note |
---|---|
&&DIAMETER &VAR_DEPTH&DRILL_DEPTH | ![]() |
Profile: &STD_HOLE_TYPE Series: &THREAD_SERIES Size: &FASTENER_ID Class: &THREAD_CLASS User Parameter: &USER_PARAM | ![]() |
Jeton | Valeur affichée |
---|---|
&BOTCSINK_ANGLE | Angle du fraisurage de sortie |
&BOTCSINK_DIAM | Diamètre du fraisurage de sortie |
&CBORE_DEPTH | Profondeur de lamage |
&CBORE_DIAMETER | Diamètre de lamage |
&CSINK_ANGLE | Angle de fraisurage |
&CSINK_DIAMETER | Diamètre de fraisurage |
&DIAMETER | Diamètre de perçage |
&DRILL_DEPTH | • Profondeur de perçage des trous taraudés, coniques ou percés de profondeur borgne • A TRAVERS (THRU) pour tous les autres trous |
&DRILL_DIAMETER | Diamètre de perçage |
&DRILL_POINT_ANGLE | Angle de pointe de perçage |
&METRIC | • OUI (YES) pour les modèles qui utilisent des unités métriques • NON (NO) pour les modèles qui n'utilisent pas des unités métriques |
&METRIC_SIZE | Taille de vis |
&NUMBER_SIZE | Nom de la taille de perçage |
&PATTERN_NO | Nombre d'instances de trou |
&PITCH | • Pas des trous filetés • 0.0 pour les trous non filetés |
&SCREW_SIZE | Taille de vis |
&STD_HOLE_TYPE | TARAUDAGE (TAP), CONIQUE (TAPERED), PERCAGE (DRILL) ou DEGAGEMENT (CLEAR) |
&STRAIGHT_DIAMETER | Diamètre de foret droit. |
&STRAIGHT_DRILL_DEPTH | Profondeur de foret droit |
&THREAD_CLASS | Classe de tolérance du trou |
&THREAD_DEPTH | • Profondeur borgne de la partie filetée du trou • A TRAVERS (THRU) pour tous les autres trous |
&THREAD_DIAMETER | • DEBUT_DIAM_EXTER (MAJOR_DIAM_START) des trous coniques • Diamètre de filetage pour les trous taraudés |
&THREAD_LENGTH | • Longueur de filetage • A TRAVERS (THRU) pour un trou fileté non variable |
&THREAD_NAME | Nom de la table de trous |
&THREAD_SERIES | Nom de la série de filetages de trou (ISO, UNC, UNF, NPT, NPTF ou ISO_7-1) |
&THREADS_PER_INCH | • Filetages par pouce pour les trous filetés • 0.0 pour les trous non filetés |
&VAR_DEPTH | Symbole de flèche vers le bas pour les trous de profondeur borgne ![]() |
&VAR_THREAD | Symbole de flèche vers le bas pour les trous de filetage borgne ![]() |
Jeton de répétition | Valeur affichée |
---|---|
HOLE_INSTANCE_COUNT | Nombre d'instances de trou |
HOLE_INSTANCE_HYPHEN_SYMBOL | Symbole - |
HOLE_INSTANCE_LABEL | Mot TROUS |
HOLE_INSTANCE_LEFT_BRACKET | Symbole ( |
HOLE_INSTANCE_RIGHT_BRACKET | Symbole ) |
HOLE_INSTANCE_SPACE | Espace |
HOLE_INSTANCE_X_SYMBOL | Symbole X |
Jeton pour les symboles hérités | Jeton pour les symboles non hérités | Symbole affiché |
---|---|---|
/ | / | Saut de ligne |
<ctrl-a>#<ctrl-b> | U+00B1 | ± (plus-moins) |
<ctrl-a>$<ctrl-b> | U+00B0 | º (degré) |
<ctrl-a>j<ctrl-b> | U+2316 | ![]() |
<ctrl-a>l<ctrl-b> | U+27C2 | ![]() |
<ctrl-a>n<ctrl-b> | U+2300 | ![]() |
<ctrl-a>r<ctrl-b> | U+25CE | ![]() |
<ctrl-a>v<ctrl-b> | U+2334 | ![]() |
<ctrl-a>w<ctrl-b> | U+2335 | ![]() |
<ctrl-a>x<ctrl-b> | U+2187 | ![]() |
<ctrl-a>y<ctrl-b> | U+2332 | ![]() |
Colonne | Valeur |
---|---|
HOLE_TYPE | TAPPED : trou taraudé droit DRILLED : trou percé droit CLEARANCE : trou de dégagement droit TAPERED : trou conique |
THREAD | YES : trou avec filetage NO : trou sans filetage |
DRILLED_DEPTH | VAR : l'option de profondeur de perçage est Borgne (Blind) TO_SEL : l'option de profondeur de perçage est Jusqu'à référence (To Reference). THRU_NEXT : l'option de profondeur de perçage est Jusqu'à suivant (To Next) THRU_UNTIL : l'option de profondeur de perçage est Jusqu'à (Through Until) THRU_ALL : l'option de profondeur de perçage est A travers tout (Through All) |
STRAIGHT_DRILL_DEPTH | La profondeur de trou percé de façon droite dans les trous coniques standard. VAR : l'option de profondeur de perçage droite est Borgne (Blind) TO_SEL : l'option de profondeur de perçage droite est Jusqu'à référence (To Reference) THRU_NEXT : l'option de profondeur de perçage droite est Jusqu'à suivant (To Next) THRU_UNTIL : l'option de profondeur de perçage droite est Jusqu'à (Through Until) THRU_ALL : l'option de profondeur de perçage droite est A travers tout (Through All) NONE : l'option de profondeur de perçage droite est Aucune (None) |
THREAD_DEPTH | VAR : l'option de profondeur de filetage est Borgne (Blind) TO_SEL : l'option de profondeur de filetage est Jusqu'à référence (To Reference). THRU : l'option de profondeur de filetage est Filet débouchant (Through Thread) |
CSINK | YES : l'option Fraisurage (Countersink) est sélectionnée NO : l'option Fraisurage (Countersink) n'est pas sélectionnée |
CBORE | YES : l'option Lamage (Counterbore) est sélectionnée NO : l'option Lamage (Counterbore) n'est pas sélectionnée |
EXIT_CSINK | YES : l'option Fraisurage de sortie (Exit Countersink) est sélectionnée NO : l'option Fraisurage de sortie (Exit Countersink) n'est pas sélectionnée |
HOLE_TYPE | THREAD | DRILLED_DEPTH | THREAD_DEPTH | CSINK | CBORE | EXIT_CSINK | CALLOUT_FORMAT | Aperçu |
---|---|---|---|---|---|---|---|---|
TAPPED | YES | VAR | VAR | NO | NO | NO | &FASTENER_ID &THREAD_CLASS/<CTRL-a>x<CTRL-b>&THREAD_DEPTH | ![]() |
TAPPED | YES | VAR | VAR | YES | NO | NO | ||
TAPPED | YES | VAR | VAR | YES | YES | NO | ||
TAPPED | YES | VAR | VAR | NO | YES | NO | ||
TAPPED | YES | VAR | THRU | NO | NO | NO | ||
TAPPED | YES | VAR | THRU | YES | NO | NO | ||
TAPPED | YES | VAR | THRU | YES | YES | NO | ||
TAPPED | YES | VAR | THRU | NO | YES | NO | ||
TAPPED | YES | VAR | TO_SEL | NO | NO | NO | ||
TAPPED | YES | VAR | TO_SEL | YES | NO | NO | ||
TAPPED | YES | VAR | TO_SEL | YES | YES | NO | ||
TAPPED | YES | VAR | TO_SEL | NO | YES | NO | ||
TAPPED | YES | TO_SEL | VAR | NO | NO | NO | ||
TAPPED | YES | TO_SEL | VAR | YES | NO | NO | ||
TAPPED | YES | TO_SEL | VAR | YES | YES | NO | ||
TAPPED | YES | TO_SEL | VAR | NO | YES | NO | ||
TAPPED | YES | TO_SEL | THRU | NO | NO | NO | ||
TAPPED | YES | TO_SEL | THRU | YES | NO | NO | ||
TAPPED | YES | TO_SEL | THRU | YES | YES | NO | ||
TAPPED | YES | TO_SEL | THRU | NO | YES | NO | ||
TAPPED | YES | TO_SEL | TO_SEL | NO | NO | NO | ||
TAPPED | YES | TO_SEL | TO_SEL | YES | NO | NO | ||
TAPPED | YES | TO_SEL | TO_SEL | YES | YES | NO | ||
TAPPED | YES | TO_SEL | TO_SEL | NO | YES | NO | ||
TAPPED | YES | THRU_NEXT | VAR | NO | NO | NO | ||
TAPPED | YES | THRU_NEXT | VAR | YES | NO | NO | ||
TAPPED | YES | THRU_NEXT | VAR | YES | YES | NO | ||
TAPPED | YES | THRU_NEXT | VAR | NO | YES | NO | ||
TAPPED | YES | THRU_NEXT | THRU | NO | NO | NO | ||
TAPPED | YES | THRU_NEXT | THRU | YES | NO | NO | ||
TAPPED | YES | THRU_NEXT | THRU | YES | YES | NO | ||
TAPPED | YES | THRU_NEXT | THRU | NO | YES | NO | ||
TAPPED | YES | THRU_NEXT | TO_SEL | NO | NO | NO | ||
TAPPED | YES | THRU_NEXT | TO_SEL | YES | NO | NO | ||
TAPPED | YES | THRU_NEXT | TO_SEL | YES | YES | NO | ||
TAPPED | YES | THRU_NEXT | TO_SEL | NO | YES | NO | ||
TAPPED | YES | THRU_UNTIL | VAR | NO | NO | NO | ||
TAPPED | YES | THRU_UNTIL | VAR | YES | NO | NO | ||
TAPPED | YES | THRU_UNTIL | VAR | YES | YES | NO | ||
TAPPED | YES | THRU_UNTIL | VAR | NO | YES | NO | ||
TAPPED | YES | THRU_UNTIL | THRU | NO | NO | NO | ||
TAPPED | YES | THRU_UNTIL | THRU | YES | NO | NO | ||
TAPPED | YES | THRU_UNTIL | THRU | YES | YES | NO | ||
TAPPED | YES | THRU_UNTIL | THRU | NO | YES | NO | ||
TAPPED | YES | THRU_UNTIL | TO_SEL | NO | NO | NO | ||
TAPPED | YES | THRU_UNTIL | TO_SEL | YES | NO | NO | ||
TAPPED | YES | THRU_UNTIL | TO_SEL | YES | YES | NO | ||
TAPPED | YES | THRU_UNTIL | TO_SEL | NO | YES | NO | ||
TAPPED | YES | THRU_ALL | VAR | NO | NO | NO | TAP &FASTENER_ID <CTRL-A>x<CTRL-B> &THREAD_DEPTH / TAP DRILL THRU | ![]() |
TAPPED | YES | THRU_ALL | VAR | YES | NO | NO | ||
TAPPED | YES | THRU_ALL | VAR | YES | YES | NO | ||
TAPPED | YES | THRU_ALL | VAR | YES | NO | YES | ||
TAPPED | YES | THRU_ALL | VAR | YES | YES | YES | ||
TAPPED | YES | THRU_ALL | VAR | NO | YES | NO | ||
TAPPED | YES | THRU_ALL | VAR | NO | YES | YES | ||
TAPPED | YES | THRU_ALL | VAR | NO | NO | YES | ||
TAPPED | YES | THRU_ALL | THRU | NO | NO | NO | &FASTENER_ID &THREAD_SERIES - &THREAD_CLASS THRU | ![]() |
TAPPED | YES | THRU_ALL | THRU | YES | NO | NO | ||
TAPPED | YES | THRU_ALL | THRU | YES | YES | NO | ||
TAPPED | YES | THRU_ALL | THRU | YES | NO | YES | ||
TAPPED | YES | THRU_ALL | THRU | YES | YES | YES | ||
TAPPED | YES | THRU_ALL | THRU | NO | YES | NO | ||
TAPPED | YES | THRU_ALL | THRU | NO | YES | YES | ||
TAPPED | YES | THRU_ALL | THRU | NO | NO | YES | ||
TAPPED | YES | THRU_ALL | TO_SEL | NO | NO | NO | ||
TAPPED | YES | THRU_ALL | TO_SEL | YES | NO | NO | ||
TAPPED | YES | THRU_ALL | TO_SEL | YES | YES | NO | ||
TAPPED | YES | THRU_ALL | TO_SEL | YES | NO | YES | ||
TAPPED | YES | THRU_ALL | TO_SEL | YES | YES | YES | ||
TAPPED | YES | THRU_ALL | TO_SEL | NO | YES | NO | ||
TAPPED | YES | THRU_ALL | TO_SEL | NO | YES | YES | ||
TAPPED | YES | THRU_ALL | TO_SEL | NO | NO | YES |
HOLE_TYPE | THREAD | DRILLED_DEPTH | THREAD_DEPTH | CSINK | CBORE | EXIT_CSINK | CALLOUT_FORMAT | Aperçu |
---|---|---|---|---|---|---|---|---|
DRILLED | NO | VAR | NA | NO | NO | NO | <CTRL-A>n<CTRL-B> &DIAMETER[.2] <CTRL-A>n<CTRL-B> &DRILL_DEPTH | ![]() |
DRILLED | NO | VAR | NA | YES | NO | NO | ||
DRILLED | NO | VAR | NA | YES | YES | NO | ||
DRILLED | NO | VAR | NA | YES | NO | YES | ||
DRILLED | NO | VAR | NA | YES | YES | YES | ||
DRILLED | NO | VAR | NA | NO | YES | NO | ||
DRILLED | NO | VAR | NA | NO | YES | YES | ||
DRILLED | NO | VAR | NA | NO | NO | YES | ||
DRILLED | NO | THRU_ALL | NA | NO | NO | NO | <CTRL-A>n<CTRL-B> &DIAMETER[.2] THRU | ![]() |
DRILLED | NO | THRU_ALL | NA | YES | NO | NO | <CTRL-A>n<CTRL-B> &DIAMETER[.2] THRU /<CTRL-A>w<CTRL-B> <CTRL-A>n<CTRL-B> &CSINKDIAM x &CSINKANGLE[.0]<CTRL-A>$<CTRL-B> | ![]() |
DRILLED | NO | THRU_ALL | NA | YES | YES | NO | ||
DRILLED | NO | THRU_ALL | NA | YES | NO | YES | ||
DRILLED | NO | THRU_ALL | NA | YES | YES | YES | ||
DRILLED | NO | THRU_ALL | NA | NO | YES | NO | <CTRL-A>n<CTRL-B> &DIAMETER[.2] THRU /<CTRL-A>v<CTRL-B> <CTRL-A>n<CTRL-B> &CBOREDIAM<CTRL-A>x<CTRL-B> &CBOREDEPTH | ![]() |
DRILLED | NO | THRU_ALL | NA | NO | YES | YES | ||
DRILLED | NO | THRU_ALL | NA | NO | NO | YES | ||
DRILLED | NO | TO_SEL | VAR | NO | NO | NO | ||
DRILLED | NO | TO_SEL | VAR | YES | NO | NO | ||
DRILLED | NO | TO_SEL | VAR | YES | YES | NO | ||
DRILLED | NO | TO_SEL | VAR | NO | YES | NO | ||
DRILLED | NO | THRU_NEXT | VAR | NO | NO | NO | ||
DRILLED | NO | THRU_NEXT | VAR | YES | NO | NO | ||
DRILLED | NO | THRU_NEXT | VAR | YES | YES | NO | ||
DRILLED | NO | THRU_NEXT | VAR | NO | YES | NO | ||
DRILLED | NO | THRU_UNTIL | VAR | NO | NO | NO | ||
DRILLED | NO | THRU_UNTIL | VAR | YES | NO | NO | ||
DRILLED | NO | THRU_UNTIL | VAR | YES | YES | NO | ||
DRILLED | NO | THRU_UNTIL | VAR | NO | YES | NO |
HOLE_TYPE | THREAD | DRILLED_DEPTH | THREAD_DEPTH | CSINK | CBORE | EXIT_CSINK | CALLOUT_FORMAT | Aperçu |
---|---|---|---|---|---|---|---|---|
CLEARANCE | NO | THRU_ALL | NA | NO | NO | NO | ||
CLEARANCE | NO | THRU_ALL | NA | YES | NO | NO | ||
CLEARANCE | NO | THRU_ALL | NA | YES | YES | NO | ||
CLEARANCE | NO | THRU_ALL | NA | YES | NO | YES | ||
CLEARANCE | NO | THRU_ALL | NA | YES | YES | YES | ||
CLEARANCE | NO | THRU_ALL | NA | NO | YES | NO | ||
CLEARANCE | NO | THRU_ALL | NA | NO | YES | YES | ||
CLEARANCE | NO | THRU_ALL | NA | NO | NO | YES | ||
CLEARANCE | NO | THRU_NEXT | NA | NO | NO | NO | ||
CLEARANCE | NO | THRU_NEXT | NA | YES | NO | NO | ||
CLEARANCE | NO | THRU_NEXT | NA | YES | YES | NO | ||
CLEARANCE | NO | THRU_NEXT | NA | NO | YES | NO | ||
CLEARANCE | NO | THRU_UNTIL | NA | NO | NO | NO | ||
CLEARANCE | NO | THRU_UNTIL | NA | YES | NO | NO | ||
CLEARANCE | NO | THRU_UNTIL | NA | YES | YES | NO | ||
CLEARANCE | NO | THRU_UNTIL | NA | NO | YES | NO | ||
CLEARANCE | NO | TO_SEL | NA | NO | NO | NO | ||
CLEARANCE | NO | TO_SEL | NA | YES | NO | NO | ||
CLEARANCE | NO | TO_SEL | NA | YES | YES | NO | ||
CLEARANCE | NO | TO_SEL | NA | NO | YES | NO |
HOLE_TYPE | THREAD | DRILLED_DEPTH | STRAIGHT_DRILLED_DEPTH | THREAD_DEPTH | CSINK | CBORE | EXIT_CSINK | SAMPLE_CALLOUT_FORMAT | Aperçu |
---|---|---|---|---|---|---|---|---|---|
TAPERED | YES | VAR | NONE | VAR | NO | NO | NO | &FASTENER_ID &THREAD_SERIES - &THREAD_CLASS &STD_HOLE_TYPE / THREAD &VAR_THREAD &THREAD_DEPTH | ![]() |
TAPERED | YES | VAR | NONE | VAR | YES | NO | NO | ||
TAPERED | YES | VAR | NONE | VAR | YES | YES | NO | ||
TAPERED | YES | VAR | NONE | VAR | NO | YES | NO | ||
TAPERED | YES | VAR | VAR | VAR | NO | NO | NO | &FASTENER_ID &THREAD_SERIES - &THREAD_CLASS &STD_HOLE_TYPE / THREAD &VAR_THREAD &THREAD_DEPTH / TAPERED &VAR_DEPTH &DRILL_DEPTH / STRAIGHT DRILL ( &STRAIGHT_DIAMETER ) &VAR_THREAD&STRAIGHT_DRILL_DEPTH | ![]() |
TAPERED | YES | VAR | VAR | VAR | YES | NO | NO | ||
TAPERED | YES | VAR | VAR | VAR | YES | YES | NO | ||
TAPERED | YES | VAR | VAR | VAR | NO | YES | NO | ||
TAPERED | YES | VAR | TO_SEL | VAR | NO | NO | NO | ||
TAPERED | YES | VAR | TO_SEL | VAR | YES | NO | NO | ||
TAPERED | YES | VAR | TO_SEL | VAR | YES | YES | NO | ||
TAPERED | YES | VAR | TO_SEL | VAR | NO | YES | NO | ||
TAPERED | YES | VAR | THRU_ALL | VAR | NO | NO | NO | &THREAD_SERIES &FASTENER_ID THREAD &VAR_THREAD &THREAD_DEPTH / TAPERED &VAR_THREAD &DRILL_DEPTH STRAIGHT DRILL THRU | ![]() |
TAPERED | YES | VAR | THRU_ALL | VAR | YES | NO | NO | ||
TAPERED | YES | VAR | THRU_ALL | VAR | YES | YES | NO | ||
TAPERED | YES | VAR | THRU_ALL | VAR | YES | NO | YES | ||
TAPERED | YES | VAR | THRU_ALL | VAR | YES | YES | YES | ||
TAPERED | YES | VAR | THRU_ALL | VAR | NO | YES | NO | ||
TAPERED | YES | VAR | THRU_ALL | VAR | NO | YES | YES | ||
TAPERED | YES | VAR | THRU_ALL | VAR | NO | NO | YES | ||
TAPERED | YES | VAR | THRU_NEXT | VAR | NO | NO | NO | ||
TAPERED | YES | VAR | THRU_NEXT | VAR | YES | NO | NO | ||
TAPERED | YES | VAR | THRU_NEXT | VAR | YES | YES | NO | ||
TAPERED | YES | VAR | THRU_NEXT | VAR | NO | YES | NO | ||
TAPERED | YES | VAR | THRU_UNTIL | VAR | NO | NO | NO | ||
TAPERED | YES | VAR | THRU_UNTIL | VAR | YES | NO | NO | ||
TAPERED | YES | VAR | THRU_UNTIL | VAR | YES | YES | NO | ||
TAPERED | YES | VAR | THRU_UNTIL | VAR | NO | YES | NO |