Create a Fluid Domain in Creo Simulation Live
You can create a fluid body for external or internal fluid domain simulation.
User Interface Location: Click > .
Release: Creo 7.0.0.0
Watch a video that demonstrates this enhancement:
What is the benefit of this enhancement?
You can create a fluid domain for parts or assemblies. For an assembly, create reference geometry to create a reference shrinkwrap, on the fly. Right-click a fluid domain and select the Remove Internal Geometry check box to remove the internal geometry. Create a fluid domain that is internal or external. For an external fluid domain, transparency is automatically applied.
For fluid domain simulation, you need a fluid body. The command, Fluid Domain, creates this fluid body for internal or external fluid domain simulation.
 |  |
You can quickly create a fluid domain, preview results, and see associative fluid domain changes when geometry is modified.
Additional Information
Tips: | None. |
Limitations: | • Fluid domain works only with geometry that is water tight. • Tolerances must be similar for assemblies and parts. • Modifying the top-level tolerance for the assembly to be as small as the tolerance for part models, increases chances that the creation of the fluid domain is successful. |
Does this replace existing functionality? | No. |
Configuration options associated with this functionality: | None. |