Power Inverter without Heat Transfer: Exercise 5—Creating a Monitoring Point
1. Create a monitoring point.
2. In Results, under Monitoring Points select Point 01.
3. In the Properties panel, Model tab, set values for the options as listed below:
◦ Position—0.0177, -0.0064, 0.0678 m
◦ Flow:
▪ Output Properties—Yes
▪ Output Derived Variables—Yes
4. In the Functions panel click 
Turn on/off view properties and select 
Hide all surfaces from the list.
Turn on/off view properties and select Hide all surfaces from the list.