Pipelines Display Settings
To Display or Hide Pipelines
1. Click 
Pipeline View. The Piping System Tree opens.
Pipeline View. The Piping System Tree opens.2. Select one or more pipelines from the Piping System Tree and right-click. A shortcut menu appears.
3. Click 
Show from the menu to display the pipeline in the Graphics window, or click 
Hide to hide the pipeline in the Graphics window.
Show from the menu to display the pipeline in the Graphics window, or click Hide to hide the pipeline in the Graphics window.To Display Centerlines or Solids
1. Click Pipeline View. The Piping System Tree opens.
Pipeline View. The Piping System Tree opens.2. Select one or more pipelines and right-click. A shortcut menu appears.
3. Click > to hide the solid pipe graphics and display pipe centerlines.
 | The Piping System Tree centerline and solid display modes differs from the centerline and solid display capabilities in Set Display and the mode set by the pipe_solid_centerline configuration option in the following way: • The Piping System Tree centerline or the solid display mode allows you to select one or more pipelines in the active assembly, including subassemblies. You can display the selected pipeline with a pipe solid or centerline. If you are creating pipelines based on the "one pipeline per assembly" modeling method, it is recommended that you use this centerline or solid display mode. • The Set Display centerline and solid display modes enables you to select only pipeline in the active assembly, but not in the subassemblies. You can display the selected pipeline with a pipe solid or centerline. • The mode set by the pipe_solid_centerline configuration option indicates the center of the pipe solid geometry with a line. This is a global setting for all pipelines. |
To Display the Piping System Tree from the Active Assembly
Click > in the Piping System Tree. All the pipelines below the current assembly are displayed.
> in the Piping System Tree. All the pipelines below the current assembly are displayed.To Modify the Column Display
1. Click Pipeline View. The Piping System Tree opens.
Pipeline View. The Piping System Tree opens.2. Click 
> . The Model Tree Columns dialog box opens.
> . The Model Tree Columns dialog box opens.3. Under Not Displayed, select the items you want to display and click 
. The selected items now appear under Displayed.
. The selected items now appear under Displayed.4. Click OK. The selected items and their respective values are displayed in the columns of the Piping System Tree.
To Display the Pipeline Component View
1. Click Pipeline View. The Piping System Tree opens.
Pipeline View. The Piping System Tree opens.2. Click the arrow adjacent to the branch node or double-click the branch node. The branch node expands to show the pipeline components.
3. Select a pipeline in the expanded Piping System Tree. The pipeline is highlighted in the Graphics window.
To Display the Piping Spool View
1. Click Pipeline View. The Piping System Tree opens. Click > in the Piping System Tree. All the pipelines that have their spool numbers generated are shown with their respective spools.
Pipeline View. The Piping System Tree opens. Click > in the Piping System Tree. All the pipelines that have their spool numbers generated are shown with their respective spools.2. Click the arrow adjacent to the spool node or double-click the spool node. The spool node expands to show its branch components.
3. Click a spool to select it in the expanded Piping System Tree. The spool is highlighted in the Graphics window.
| | You can switch between Pipeline View and Spool View at any time. |