To Move Geometry Using Dimensions
1. Select geometry to move.
2. Click > > 
Move by Dimension. The Move tab opens.
Move by Dimension. The Move tab opens.3. Select a dimension reference.
4. Type a value for the dimension.
5. To move the selected rounds and chamfers that attach the moved geometry to the model, click the References tab and check the Transform selected attachment rounds/chamfers check box. If you do not check this check box, the selected attaching rounds and chamfers are removed and optionally recreated.
6. To set additional attachment and propagation options, right-click and use the shortcut menu or use the Attachment and Options tabs.
 | When the Attach moved geometry check box is not selected, the resulting geometry is a quilt. The appearance of the original solid surfaces is propagated to both sides of the resulting quilt. |
7. To maintain tangency between the moved geometry and neighboring geometry:
a. Click 
.
.| | If the flex_tan_propagation_default configuration option is set to on, tangency is automatically propagated. |
b. If needed, set conditions for neighboring geometric entities using the Conditions tab, the Add condition option, or the shortcut menu.
8. To create a copy-move feature, click 
.
.| | When the selected geometry is an open quilt, and you select  , clear the Attach moved geometry check box on the Attachment tab. |
9. To navigate through other possible solutions for geometry configurations, on the Attachment tab, click Next or Previous.
| | • When you click Next, the system might stop responding while it tries to find the best possible solution. This is because it checks for all possible combinations for the solution. The system might also stop responding if a solution does not exist. At this point, to interrupt the check and continue working: 1. While the model is regenerating, click  Stop at the bottom of the window to interrupt the regeneration. A failed feature is created.2. In the Model Tree, click the failed feature and select  Edit Definition. Even if you do not make any changes in the settings, this gives you the opportunity to check if the result is what you want.3. Click  OK. The feature regenerates.• When the system is unable to find more than one solution, the Previous and Next options are not available. |
You can select a different solution when you redefine the Move feature.
10. Click OK or middle-click to accept the feature.
OK or middle-click to accept the feature.