Manufacturing > Manufacturing > NC Check > NC-Check > To Control the Tool Display
To Control the Tool Display
The Tool View option on the NC DISP menu allows you to control the tool display. The display can be set to:
Visible—The tool and the workpiece are displayed as solid.
Invisible—The material will be removed, but the tool will not be seen.
Transparent—The tool will be displayed as transparent: all workpiece geometry will be visible through it.
Part Transp—The workpiece is "transparent" for the tool.
Visible Len—Allows you to show just the cutting portion of the tool, to increase the speed of display. Enter the visible tool length (valid range is shown in the prompt).