Electrical Design > Creo Harness Manufacturing > Creo Harness Manufacturing > About Creo Harness Manufacturing Packages
About Creo Harness Manufacturing Packages
Creo Harness Manufacturing comes in Lite, Standard, and Advanced packages. The Lite package is included in Creo Parametric. The following table gives a comparison of the features supported by the three packages:
Features
Lite
Standard
Advanced
Number of supported electrically active components (connectors, terminals, and splices)
5
20
> 20
Number of supported wires, bundles, cables, and overbraids
20
50
> 50
Supports overbraid
Supports cosmetic features: tapes, tie-wraps, markers, and heat shrink tubing
Supports tapes, tie-wraps, and markers only.
In-line components (axial)
splices
In-line components (radial)
Dual in-line components
Supports sub harnesses
Closed loop topography
Single
Branch bundle feature
Single
Automatic Bend to Fit feature
Automatically attempts to resolve branch overlaps in 2D representation
Auto-generation and annotation of the 2D representation dimensions
Supports standard drawing sheet sizes: A0 to A4 and F to A
A0/F
User defined drawing templates
Supports variable drawing sheet that expands horizontally to fit the harness drawing
Map user defined parameter for BOM description
Map user defined parameter for spool part number
Map user defined parameter for connector seal
Auto-generation and placement of the bill of materials
Electrically active components
Generates bill of materials with consolidated spool usage.
Generates bill of materials with consolidated spool usage, wedges, and cavity seals.
Auto-generation and placement of the Wire List table
Auto-generation and placement of the Connector Cavity tables
Contains the following parts:
Housing
Terminals
Wires
Contains the following parts:
Housing
Terminals
Seals
Wires
Rear view of the connector
Auto-pagination of BOM and Wire List tables on standard drawing sheets
Auto placement of 3D assembly view
Auto-generation of component views
Automatic ballooning of items
Export Wire Cutting List in the CSV file format
Export BOM in the CSV file format
DXF format for output
Automatic design-rule checking
Editing of the 2D harness manufacturing drawing
Associativity of connectors to 2D harness
Component flexible parameter preservation
Backshells and boots associativity
Grommet handling
Manifolds, T, Y; and transition boots
Alignment of flattened harness to attached component geometry
Splice handling improved
Bulk item handling
Multiple extraction for markers
Configuration file for HMX drawing output
Reference designator and BOM Balloon improved positioning
Reference Designator only
Reference Designator only
Pagination of cavity tables
Bundle termination on entry port
Parallel splice processing
Table customization for user defined parameters
Table wire length manipulation
Windchill Compatibility
Front face dimensioning scheme option
Output file control options