To Assemble Components to a Dimension Pattern
1. In an open assembly, click Assemble or drag a component from the browser into the active assembly session.
2. Place the component with at least one offset type constraint. To create the pattern, you must specify the offset values that you want to use as references.
3. Select the component in the Model Tree and do one of the following operations to open the Pattern tab:
Click Pattern.
Right-click in the graphics window and choose Pattern from the shortcut menu.
4. In the first box select Dimension.
5. Click the Dimensions tab, select a dimension in the assembly, and enter an incremental value, or drag the handle to the required location.
6. Click the Direction 2 box or right-click the graphics window and select Direction 2 Dimensions from the shortcut menu to enter a second dimension, or drag the handle to the required location.
7. Select the second dimension in the assembly and enter an incremental value.
8. Enter the number of members in each dimension in the respective boxes.
9. Click .