To Modify a Profile End Point Pattern
1. Click Framework > Point Pattern. The Point Pattern dialog box opens.
2. Click .
3. Click the Pattern to Modify reference collector and select the point pattern to modify.
4. Make changes as required by taking the actions listed below:
Change values for X0, X1, N_X, Y0, Y1, and N_Y
Select or clear the X direction symmetric check box.
Select or clear the Y direction symmetric check box.
In the DM box, change the value for hole diameter.
In the T box, change the value for the attach hole depth.
5. Click one of the options listed below to continue:
OK to complete point pattern modification and close the dialog box.
Repeat to complete point pattern modification without closing the dialog box and continue with modifying another point pattern.
Cancel to cancel point pattern modification and close the dialog box.