Term
|
Definition
|
Hard relative convergence.
|
|
Hard absolute convergence.
|
|
Soft constraint.
|
|
Soft Variable
|
|
CX, CY, CZ
|
Cyclic symmetry fabrication constraint, cyclic symmetry about the specified axis.
|
Fractional topology move limit.
|
|
Maximum allowable number of design cycles for the optimization study.
|
|
Diagnosis output level.
|
|
Displacement response.
|
|
Constraint screening, to keep only the constraints that are potentially critical for the current design cycle.
|
|
Minimum topology move limit.
|
|
Method for solving the Eigenvalue, in modal analyses.
|
|
EX, EY, EZ
|
Extrude along a specified axis fabrication constraint
|
F0X, F0Y, F0Z
|
Filling fabrication constraint, adds material to the region by filling symmetrically from the specified plane
|
FBX, FBY, FBZ
|
Filling fabrication constraint, adds material to the region by filling from the bottom plane upward.
|
FGX, FGY, FGZ
|
Filling fabrication constraint, adds material to the region by filling it from the general plane outward.
|
Frequency mode number response.
|
|
FSX, FSY, FSZ
|
Filling fabrication constraint, adds material to the region by filling simultaneously from the top and bottom plane.
|
FTX, FTY, FTZ
|
Filling fabrication constraint, adds material to the region by filling from the top plane downward.
|
Hard maximum violation
|
|
Grid stress response.
|
|
Heat transfer compliance response.
|
|
Inertia response.
|
|
Initial Mass Fraction parameter.
|
|
KX, KY, KZ
|
Fabrication constraint, extrude radially about a specified axis.
|
Linear approximation method control.
|
|
Mass fraction response, related to INIT.
|
|
Mode tracking,, used in modal analyses.
|
|
MXY, MYZ, MZX
|
Mirror symmetry fabrication constraint, mirror about the specified plane.
|
Parameter, starting location of the sheet.
|
|
Parameter, number of sectors into which the topology region is divided.
|
|
Maximum number of constraints to be retained parameter, related to constraint screening (DSCREEN).
|
|
P0X, P0Y, P0Z
|
Symmetric periodic pattern repetition fabrication constraint, mirrors a pattern that repeats along a specified axis.
|
Parameter that allows through holes to be created along the given filling direction.
|
|
PX, PY, PZ
|
Periodic pattern repetition fabrication constraint, repeats pattern instances along a specified axis.
|
RBX, RBY, RBZ
|
Fabrication constraint, fills radially, outward from the inner surface, about a specified axis.
|
RGX, RGY, RGZ
|
Fabrication constraint, fills radially from the general surface, about a specified axis.
|
RTX, RTY, RTZ
|
Fabrication constraint, fills radially, inward from the outer surface, about a specified axis.
|
Response type, selects which response will be defined as the objective or the constraint.
|
|
S2X, S2Y, S2Z
|
Stamping fabrication constraint, stamps with two sheets simultaneously from the top and bottom, normal to the specified axis.
|
SBX, SBY, SBZ
|
Stamping fabrication constraint, stamps with one sheet from the bottom, normal to the specified axis.
|
Strain energy response.
|
|
Reaction force response.
|
|
Parameter that specifies a thickness for the stampable sheet.
|
|
Strain response.
|
|
Stress response.
|
|
STX, STY, STZ
|
Stamping fabrication constraint, stamps with one sheet from the top, normal to the specified axis.
|
Maximum member size, the maximum desired dimension of any resultant topology component.
|
|
Minimum gap, the minimum distance between the items you generate with topology optimization.
|
|
Actual constraint object, selects responses that will be treated as constraints during optimization. The given value (lower or upper bound) will be used as constraint bounds directly.
|
|
Scale of initial constraint object, selects responses that will be treated as constraints during optimization. Uses the given value (lower or upper bound) as a scale factor to multiply the initial response value to create the actual constraint bound.
|
|
Temperature response.
|
|
Number of processors for the solver to use in an analysis.
|
|
Objectives for multiple response values. Selects responses that will be treated as the objective function during optimization in cases in which the selected response contains multiple values.
|
|
Objective for a single response value. Selects responses that will be treated as the objective function during optimization in cases in which the selected response contains only one value.
|
|
Topology design region, where the optimization process decides which elements to include in the optimization.
|
|
Constraint truncation threshold, related to constraint screening (DSCREEN).
|
|
Fabrication constraints, used to enforce manufacturing requirements in topology optimization.
|
|
UXY, UXZ, UYZ
|
Fabrication constraints, enforce uniform requirements in planes parallel to a specified plane.
|
Fabrication Constraint, keep or remove the entire topology region.
|
|
Parameter, density value of the void area where there is no material.
|