Mold Design and Casting
>
Working with Parting Surfaces
>
Modifying Parting Surfaces
>
To Draft the Geometry of a Parting Surface
To Draft the Geometry of a Parting Surface
1.
In the Model Tree, click the parting surface feature and select
Redefine Parting Surface
from the mini toolbar. The
Parting Surface
tab opens.
2.
Click
Draft
. The
Draft
tab opens.
3.
Use the draft tool to create a draft feature for the parting surface.
To create a draft offset feature or to create an area offset feature, click
Offset
and use the options to create the required feature.