To Export Cabling Geometry
You can export the complete geometry of wires and cables, or just the centerlines, from a Cabling assembly to IGES and other common formats.
1. Click File > Save As > Save a Copy.
2. Select the export format in the Type box. The Export Environment dialog box for the selected environment opens. If the functionality is supported in the selected format:
◦ Select Export cable surfaces to export the cables as surfaces (as seen in thick Cable mode.)
◦ Select Datum curves and points to export cabling harness as centerlines.
Select neither to exclude any cabling geometry information from the export.
3. Click OK.