Detailed Drawings > Annotating the Drawing > Geometric Tolerances > To Show Geometric Tolerances
  
To Show Geometric Tolerances
You can show geometric tolerances that were created in the Part and Assembly modes of the model.
1. On the Annotate tab, click Show Model Annotations. The Show Model Annotations dialog box opens.
2. Click the tab.
3. Select geometric tolerances from the list and click OK. The selected geometric tolerances are displayed in the drawing.
4. Click Close to close the Show Model Annotations dialog box.
 
* You can erase or delete geometric tolerances that are shown in drawings. If you delete a shown geometric tolerance it is deleted in both the drawing and the model.