Creo 教程 > Creo Flow Analysis 教程 > 其他教程 > Creo Flow Analysis Additional Tutorials > Tutorial 2 - Turbulent Flow in Diffuser > Turbulent Flow in Diffuser: Overview
  
Turbulent Flow in Diffuser: Overview
This tutorial simulates turbulent flow in a diffuser. Air enters at a velocity of 18.06 m/s and exits at 0 Pa. shows the geometry and conditions for the simulation.
1. Outflow
Outer Pressure = 0 Pa
2. Inflow
Specified Velocity = 1.8406e-05 Pa-s
Density (ρair) = 1.15758 km/m3
Viscosity (μair) = 0.02614 W/m-K
Air Specific Heat = 1005 J/Kg-K
The exercises in the Flow Analysis simulation are:
1. Turbulent Flow in Diffuser: Exercise 1—Setting up the Model
2. Turbulent Flow in Diffuser: Exercise 2—Preparing the Mesh
3. Turbulent Flow in Diffuser: Exercise 3—Defining Physics Modules
4. Turbulent Flow in Diffuser: Exercise 4—Assigning Boundary Conditions
5. Turbulent Flow in Diffuser: Exercise 5—Creating a Monitoring Point
6. Turbulent Flow in Diffuser: Exercise 6—Performing the Simulation
7. Turbulent Flow in Diffuser: Exercise 7—Analyzing Results