What's New: Creo Parametric 11.0 > 11.0.0.0 > Manufacturing > Support for Trimming or Extending the Retract Movements to a User-Defined Plane
Support for Trimming or Extending the Retract Movements to a User-Defined Plane
Creo Parametric 11.0.0.0
User Interface Location:
1. In Manufacturing, click one of the following:
◦ Mill > Volume Rough
◦ Mill > Profile Milling
◦ Mill > Face
◦ Mill > Trajectory
For holemaking, click Mill and then select a holemaking type command in the Holemaking Cycles group.
2. Select the Clearance tab.
Videos
See the video on the Learning Connector.
Description
Use the new Trim Plane option for trimming or extending the retract move to a user-defined datum plane. This option is applicable for the following 3-axis Milling NC sequences:
• Volume milling
• Profile milling
• Face milling
• Trajectory milling
• Holemaking in Mill mode
Benefits
This enhancement provides the following benefits:
• More flexible retract options for milling
• Higher productivity with less time spent on retracts
Additional Information
Tips:
None.
Limitations:
No known limitations.
Does this replace existing functionality?
No.
Configuration option associated with this functionality:
None.
Was this helpful?