To Save and Retrieve Sheetmetal Design Settings
1. Click > > . The Model Properties dialog box opens.
| You can right-click a body in the Model Tree and select Preferences to open the Sheetmetal Preferences dialog box. |
2. Click change in one of the following lines:
◦ Bend Allowance
◦ Bends
◦ Relief
◦ Seam
◦ Miter Cuts
The Sheetmetal Preferences dialog box opens.
3. To save current settings as an external file, click > . The Save a Copy dialog box opens.
Browse to a directory in which to save the file and click OK.
4. To retrieve a saved file and apply default settings to the current model, click > . The File Open dialog box opens.
Browse and select an *.smd file. The settings are retrieved and applied.
| When you retrieve a file whose value of SMT_SHARPS_TO_BENDS is different from the value of the corresponding configuration option for the session, the value of the configuration option will update. |